样式: 排序: IF: - GO 导出 标记为已读
-
Statement of Retraction: Creep and mechanical properties of aluminium A356 composites reinforced with coated and un-coated MWCNTs fabricated using the stir casting method Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-11-08
Published in Materials Science and Technology (Vol. 39, No. 18, 2023)
-
Low-cycle fatigue mashing behaviours of HTRB630 high-strength steel exposed to high temperatures Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-09-15 Li Gao, Mei-Ling Zhuang, Gong Zuo, Chuanzhi Sun
The tensile test and low-cycle fatigue test of HTRB630 high-strength steel bars after high-temperature exposure were investigated. Based on the plastic strain energy density theory of mashing behav...
-
Polymer nanocomposite films of Sr-doped BiVO4 for photodegradation of malachite green Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-09-04 B. M. Nithin, A. G. Jineesh, N. Manikanda Prabu
Nanosized m-BiVO4 and Sr-doped derivatives were prepared by solid state reactions, to produce Bi1-xSrxVO4 (X = 0%, 4%, 8% & 12%). XRD and Raman investigations confirmed the formation of BiVO4 phase...
-
Constructing superior rate-performance manganese-based anode for lithium-ion batteries by tuning interface effect Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-31 Shenghe Wang, Song Li, Qianqian Cui, Zhongsheng Wen, Juncai Sun
Interface engineering is an effective way to improve the electrochemical performance of electrode materials for LIBs. Point contact interfaces in composites are constructed by growing of Mn3O4 nano...
-
Evolution mechanism of the low-carbon MgO-based alkali-activated system under different heat-treatment conditions Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-27 Yaoting Jiang, Yuan Jia, Xinmei Zou, Jingxi Zhang, Yuxin Zou
Magnesium silicate hydrate (M-S-H) gel is the main product of MgO-based alkali-activated system (MAAS). The molecular structure and phase changes of M-S-H gel at different temperatures were charact...
-
Micromechanics-based understanding of the stability of film-like austenite in steels Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-26 Gaurav Kumar, Tanmay K. Bhandakkar, Sushil K. Mishra, Amol A. Gokhale
Based on the carbon content and processing technique, the austenite morphology in steels can be either film-like or blocky. Experiments have shown that a film-like morphology of austenite shows a h...
-
Enhancing the tribological properties of pure Ti by pinless friction surface stirring Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-26 M. Ashoori, M. Jafarzadegan, R. Taghiabadi, M. Saghafi Yazdi, I. Ansarian
Friction surface stirring (FSS) was employed to enhance the tribological properties of commercially pure Ti (CP-Ti). Applying FSS under the optimised process parameters (i.e. rotation and traverse ...
-
Parameters prediction in additively manufactured Al-Cu alloy using back propagation neural network Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-23 Feiyue Lyu, Leilei Wang, Jiahao Zhang, Mingzhen Du, Zhiwei Dou, Chuanyun Gao, Xiaohong Zhan
The relationship between tensile strength, wire feeding speed and travel speed is built based on Back Propagation (BP) neural network during the wire arc additive manufacturing (WAAM) process. The ...
-
Effect of In on Fe phase morphology and properties of Cu-Fe alloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-20 Dawei Yuan, Zhenxia Liu, Chengjun Guo, Hao Zeng, Jianbo Zhang, Mingmao Li, Bingfeng Peng, Bin Yang
In this paper, Cu-6.2Fe-xIn (x = 0, 0.2, 0.4) alloy was prepared by melting casting and mechanical heat treatment. The Fe phase morphology of Cu-6.2Fe-xIn alloy was observed by SEM, EBSD and TEM. T...
-
Investigation on microstructure and mechanical properties of boron-modified 13Cr5Ni2Mo by powder-pack boriding Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-20 Samira Tlili, Saida Bouyegh, Abdelkader Daoui, Abdelmoumene Guedri, Mohamed Islam Tlili, Latifa Tairi, Mustapha Djama, Radouane Graine, Djihad Charmati
The main objective of the present paper is to investigate the effect of pack boriding treatment at 950°C/4 h on surface 13 Cr supermartensitic stainless steel. Scanning electron microscopy and X-ra...
-
Tribological behaviours of Mo–Si–B–xTi alloys against Al2O3 ceramic and AISI 52100 steel Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-20 Hui Tan, Wenyuan Chen, Juanjuan Chen, Zongxiao Zhu, Shengyu Zhu, Jun Yang
In this study, the Mo–Si–B alloys containing 10–30 wt% Ti were prepared by spark plasma sintering. The dry sliding tribological properties against Al2O3 ceramic and AISI 52100 steel were thoroughly...
-
Microstructure and properties change in Al5+xCr12Fe35Mn28-xNi20 high entropy alloys Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-18 Sally Elkatatny, Atef Hamada, Huakang Bian, Akihiko Chiba, Mohamed A. H. Gepreel
In the present study, a non-equiatomic AlCrFeMnNi high-entropy alloy (HEA) bearing cost-effective elements has been developed to enhance the strength by increasing the Al content. The HEAs were pre...
-
Hydrogen damage behaviour of X80 steel under high voltage direct current interference Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-17 Wenhui Liu, Wuxi Bi, Jianhua Liu, Maocheng Yan, Wei Lan, Yanhui Zhang, Wen Wen, Songmei Li, Mei Yu
In this paper, the hydrogen damage behaviour of X80 steel under HVDC interference was investigated at different sites and applying voltages. The effect of application of a sustained tensile load du...
-
Refining interface compatibility and carrier management via π-π conjugated stacking for efficient and stable perovskite solar cells based on low-temperature processing Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-17 Yun Yang
Deficiencies and instability in the ETL, perovskite layer, or their interface contribute to carrier nonradiative recombination losses. To address these issues, we propose an electron collection and...
-
Thermochemical modelling and mechanical property of the Al-7.6Si-xZr alloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-15 Prosanta Biswas, Subhajit Das, Sushil Chandra Das, Manas Paliwal, Himadri Roy, Manas Kumar Mondal
This study utilised the gravity casting method to modify hypoeutectic Al-7.6Si alloys with Zr at varying weight percentages (0.1%, 0.2%, and 0.3%). The unmodified alloy typically consists of a need...
-
The densification, microstructure, and mechanical properties of (TiB2+SiC)/AlSi10Mg composites manufactured by LPBF Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-10 Bo Dang, Zhao Zhang, Kan Li, Yan Chen, Junfeng Xu, Zengyun Jian
Herein, the (TiB2 + SiC)/AlSi10Mg composites were prepared using a planetary ball mill and fabricated by the LPBF technique. The effects of nano-TiB2 particles and laser power on the densification,...
-
Optical, magnetic, and photoluminescence properties of Cr/Mn-doped ZnO nanoparticles synthesised by solution combustion method Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-10 S. M. Devasena, G. Murali, D. Amaranatha Reddy, Y. C. Ratnakaram, A. Sharon Smiley, K. Sunil Kumar, R. P. Vijayalakshmi
In this study, we investigated the structural, optical, photoluminescence, and magnetic characteristics of pristine and Cr/Mn-doped ZnO nanoparticles prepared via the solution combustion method. Th...
-
Modelling the laser surface hardening in a ferrite and pearlite initial microstructure Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-07 Felipe M. Castro Cerda, Constantinos Goulas, Dakota Jones, Ata Kamyabi, Douglas Hamre, Patricio Méndez, Gentry Wood
The present study explores the microstructure and the depth-dependence of hardness after a single pass laser heat-treatment. The initial microstructure was selected as ferrite and pearlite in diffe...
-
Microstructure and properties of AlCrxFeNi1.2Cu0.8 high-entropy alloys at high temperature Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-02 Chunyan Li, Zihui Tang, Yu Lu, Lin Tian, Jianshu Zhai, Xiaocheng Li, Shengzhong Kou
With the development of space technology, high-temperature resistant materials have become one of the hot spots in space research. The research of new high-temperature materials has become the key ...
-
Effect of Fe addition on phase evolution, microstructure and properties of Ti50Ni50-XFeX alloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-02 Jagadish Parida, Subash Chandra Mishra, Ajit Behera
The work aims to study the effect of the Fe content on the properties of Ti50 Ni(50−X) FeX alloy (where X = 0, 2, 4, 6, 8, and 10 at.-%) sintered at 1050°C and 1150°C using the conventional sinteri...
-
Die-sinking and rotary EDM surface and subsurface analysis of MoSi2-SiC ceramic composites Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-01 L. Selvarajan, R. Rajavel, Mohammed Yunus, Rami Alfattani
Rotating EDM and die sinking EDM were used to compare the machinability of MoSi2-SiC composites. Surface flaws such as micro cracks, un melted spherical particles, pores, a recast layer and craters...
-
Critical Assessment 43: Microstructural and mechanical properties of friction stir additively fabricated SiC-Reinforced AA6061 build Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-08-01 Smrity Choudhury, Rahul Das, Durjyodhan Sethi, Joydeep Roy, Barnik Saha Roy
Friction stir additive manufacturing was employed to fabricate a SiC-reinforced AA6061 composite. The tool with a pin length of 4.5 mm (plunge depth of 50% into the lower layer thickness) was used ...
-
Investigations of performance characteristics on direct metal laser sintered MONEL K-500 superalloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-30 M. Mani, M. Mohanraj, A. G. Karthikeyan, K. Kalaiselvan
MONEL K-500 superalloy is difficult to manufacture precisely in traditional manufacturing processes like casting, forming and machining. The direct metal laser sintering (DMLS) process is one of th...
-
Phase formation and electrical properties of SBNLT ceramics prepared via combustion technique Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-25 Thanapon Sinkruason, Anupong Luangpangai, Nipaphat Charoenthai, Aurawan Rittidech, Phieraya Pulphol, Naratip Vittayakorn, Theerachai Bongkarn
This report investigates the effect of firing temperatures on the phase formation, microstructure, electrical, and energy storage properties of lead-free Sr0.3(Bi0.7Na0.67Li0.03)0.5TiO3 (SBNLT) cer...
-
Effect of element segregation on deformation mechanisms of nano/ultrafine-grained 304 stainless steel Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-25 Miaomiao Zhao, Yang Liu, Hongyan Wu, Linxiu Du
The effect of Cr and Ni element segregation on austenite stability and deformation mechanisms of nano/ultrafine-grained 304 stainless steel obtained by cryogenic rolling plus annealing treatment wa...
-
A visible light-sensitive argentous oxide/calcium aluminate nanocomposite photocatalyst Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-21 Zizhan Sun, Qianmin Cong, Xiaoyu Wang, Jiayin Cui, Zhengyu Cai, Chuangang Fan, Lizhai Pei
A photo-deposition method was developed to synthesise argentous oxide/calcium aluminate nanocomposites (Ag2O-CAONCS) with orthorhombic Ca5Al6O14 and cubic Ag2O phases. Micro-morphology, micro-struc...
-
Friction extrusion of AZ91/bioactive glass gradient composite Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-17 Pourya Motavallian, Sayed Mahmood Rabiee, Hamed Jamshidi Aval
The effect of the pre-friction extrusion microstructure of AZ91 billet on the microstructure, mechanical properties, and corrosion resistance of AZ91-bioactive glass surface composite rods was inve...
-
Characterisation of thin α-Al2O3 tribo-coating deposited by low-power gas tunnel plasma spray Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-13 Zulhelmi Alif Abd Halim, Norhayati Ahmad
This study used a unique, low-power (2.8 kW) gas tunnel plasma spray and γ-Al2O3 feedstock powder to deposit a thin Al2O3 coating (<2 µm) on mild steel substrate. By optimising the plasma gas flow ...
-
Wear and corrosion of CoCrFeNiMnTix high entropy alloy coatings by laser cladding Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-13 D.C. Wang, C.L. Wu, S. Zhang, C.H. Zhang, D.X. Zhang, X.Y. Sun
CoCrFeNiMnTix (x = 0.5, 1.0, 1.5, 2.0 in atomic ratio) high entropy alloy (HEA) coatings were prepared on 304 stainless steel by laser cladding. Experimental results showed that the CoCrFeNiMnTix H...
-
Microstructural evolution of Ag-0.20wt-%Mg-0.19wt-%Ni alloy in under-oxidized condition Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-11 ZiYang Li, Kai Huang, Gang Zhu, XinLang Zuo, ChengCheng Chen
The under-oxidized condition (insufficient internal oxidation) for Ag-0.20Mg-0.19Ni (in wt-%) alloy was conducted at 650°C for 2 h, and the microstructural evolution in the alloy was investigated. ...
-
Enhanced adsorption films of dendrimers on mild steel for super protection Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-11 Minghui Zhong, Yueting Shi, Fang Gao, Hongru Li
This study employed metronidazole skeletons based on the target branched molecules (TBMs) for achieving efficient anti-corrosion of mild steel in HCl solution. In contrast, the reference linear mol...
-
Artificial neural network applicability in studying hot deformation behaviour of high-entropy alloys Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-10 Mohammad Reza Zamani, Hamed Mirzadeh, Mehdi Malekan
The potentials of artificial neural network (ANN) modelling as a potent machine learning approach for investigating the hot deformation behaviour of high-entropy alloys (HEAs) and multi-principal e...
-
An overview on the microstructure and properties of Fe/Ti based dissimilar joints Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 T. N. Prasanthi, C. Sudha, S. Saroja
Joining of Ti and Fe-based alloys is challenging due to the formation of deleterious phases at the interface. Since fusion welding is unsuitable for the purpose, over the years, many solid-state we...
-
Corrosion, fatigue and wear of additively manufactured Ti alloys for orthopaedic implants Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 J. Tjandra, E. Alabort, D. Barba, S. Pedrazzini
Additive manufacturing (AM) allows for the fabrication of custom orthopaedic implant devices which have complex geometries and similar mechanical properties to bone. This paper reviews the corrosio...
-
Effects of Ga and In on the properties of Zn-Al sacrificial anodes Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 Junqi Shao, Fei Yang, Jian Wang, Shenghua Deng, Yong Liang, Hongjin Zhao, Tongsheng Deng, Liang Xu
The influence of Ga and In on the microstructure and electrochemical performance of a Zn-Al alloy was investigated. It was found that the microstructure of the Zn-Al sacrificial anode can be signif...
-
Microstructure evolution of lean duplex stainless steel produced by a short process Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 Xinghai Zhang, Qingdi Gong, Jiaqi Li, Chunting Liu, Jingyuan Li
A short process of direct cold rolling of continuous casting billets following solution treatment is proposed, and the effect of cold-rolled reduction on the microstructure evolution and corrosion ...
-
Substitution of Zn for Cu in Mg–Y–Zn alloys designed for fracturing ball Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 Guoqiang Xi, Ju Xiong, Yanlong Ma, Jie Chen, Zhongyu Mao, Jiaju Lin, Linjiang Chai, Jingfeng Wang
The microstructure, mechanical properties and degradation behaviour of Mg95Y3Zn2 (MYZ), Mg95Y3Zn1Cu1 (MYZC), and Mg95Y3Cu2 (MYC) (at.-%) alloys have been studied. All the alloys mainly contain α-Mg...
-
Microstructure and mechanical properties of suction-cast aluminium–cerium alloys Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-06 Rahul Gope, Sukla Mondol, Sourav Ganguly, Animesh Mandal
In the present investigation, the microstructure and tensile properties of Al–12Ce, Al–12Ce–4Si, and Al–12Ce–4Si–0.4Mg alloys (wt-%), fabricated by suction-casting (SC) and gravity-casting (GC) wer...
-
Structural and optical characteristics of NiO films deposited using the PLD technique Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-05 A. H. Farha
NiO films were deposited on glass and Si(100) substrates by reactive pulsed laser deposition from the Ni target. Nd: YAG laser (1064 nm) was used. The oxygen pressure was between 0.05 and 0.3 Torr....
-
Enhanced corrosion resistance of the as-cast AZ91 magnesium alloy by micro-addition of the strontium and rare earth elements Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-04 Aria Afsharnaderi, Mehrab Lotfpour, Ahmad Bahmani, Hamed Mirzadeh, Mehdi Malekan, Massoud Emamy, Mojtaba Fatehi Mollayousef, Soraya Bornay Zonoozi
The synergetic effect of strontium (Sr) and rare earth elements (RE) on the corrosion properties of as-cast Mg–9Al–1Zn alloy were studied. Via the addition of 0.5 wt-% RE and 0.5 wt-% Sr (RE/Sr rat...
-
Effect of initial microstructure on phase transformation and mechanical properties of Ti–3Al–5Mo–4Cr–2Zr–1Fe alloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-02 Qisong Zhu, Bing Lu, Jiayu Xue, Feng Li, Liang Feng, Hui Chang
Phase transformation, microstructure evolution, and mechanical properties of Ti–3Al–5Mo–4Cr–2Zr–1Fe alloy were investigated during a continuous heating process. Three microstructures, specifically ...
-
Experimental research on joining AA5052-H32/Polyoxymethylene sheets with novel stepped clinching process Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-07-02 Xingang Zhang, Chao Chen
The increasing availability of high-performance materials has boosted the demand for advanced joining techniques for heterogeneous sheets in the industry. The novel stepped clinching process (SCP) ...
-
Microstructure and properties of refractory high entropy alloys containing Si and Cr Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-30 Rui Li, Song Zhang, Yonggang Xu
Mo0.5NbHf0.5ZrTiAl, Mo0.5NbHf0.5ZrTiSi0.5Al and Mo0.5NbHf0.5CrZrTiAl (molar ratio) refractory high entropy alloys (RHEA) were prepared by vacuum arc melting. The influences of Si and Cr on microstr...
-
Effect of processing route on ballistic performance of Ti-6Al-4V armour plate Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-30 Beatriz Fernández Silva, Oliver Levano Blanch, Kam Sagoo, Martin Jackson
Titanium alloys are a key part of an armour designer’s toolset due to their high ballistic mass efficiency. However, titanium’s high cost has restricted its use in military land-based vehicles. In ...
-
Morphology and formation of three-phase pearlite in an aged 100Mn13 steel Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-30 Bo Liang, Jiaoyang Sun, Jing Zhao, Zhimin Ding, Rujin Tian, Feng Yan
The pearlite formed in 100Mn13 high carbon high manganese steel after 1323 K water toughening subsequently 923 K aging treatment is studied by transmission electron microscope and high-resolution t...
-
Effect of interaction between P and Ce on properties of copper Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-30 Jin-Tao Song, Yu-Duo Fu, Ke-Xing Song, Qian-Qian Zhu, Xiao-Wen Peng, Yun-Xiao Hua, Yan-Jun Zhou, Xiu-Hua Guo, Shi-Zhong An, Ying-Xuan Ma
The effect of interaction between Ce and P on the microstructure and properties of copper has been rarely reported. In this study, it was investigated by utilising the OM, EPMA, SEM and TEM techniq...
-
A review on ZIF carbon materials for sodium-ion battery Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-27 Olatunji V. Oni, Ifeoluwa P. Oyekunle, Owolabi J. Akanni, Daniel A. Ayejoto
An alternative battery system to the lithium-ion battery has become paramount due to its high cost and limited distribution across the earth's surface. One of the significant challenges encountered...
-
Hot-extruded AlCoCrFeNi high-entropy alloy with ultra-high strength and large ductility Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-27 Zhenyu Dou, Jingou Yin, Jingzhe Niu, Ming Wei, Jian Wang
An equimolar AlCoCrFeNi high-entropy alloy (HEA) with trade-off properties between strength and ductility is prepared by hot extrusion for the first time. Compared with the HEAs prepared by casting...
-
Corrosion inhibition capabilities of aluminium thin films on AZ31 magnesium alloy Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-27 Sundeep Kumar Marndi, Pachaiappan Raman, Amirthapandian Sankarakumar, Ponpandian Nagamony, Paramasivam Thangadurai
Al coating of varying thicknesses in the 50 to 200 nm range was coated on AZ31 Mg alloys to improve its corrosion capabilities. The thermal evaporation method is used for coating AZ31 Mg alloys. GI...
-
Numerical and experimental investigation on AZ91 friction stir welding joints: mechanics, properties Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-27 Ashish Desai, Bharat Khatri, Harikrishna Rana, Vivek Patel, Vishvesh Badheka
The present endeavour is to evaluate numerically and experimentally the influence of friction stir welding (FSW) parameters on peak temperatures, microstructures and mechanical properties of AZ91 m...
-
Evolution in microstructure, properties of the laser cladding CoCrFeMoNi coatings at different annealing temperatures Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-23 Ning Liu, Qichen Zhou, Meng Xu, Muye Niu, Pengjie Zhou, Pingyi Guo
Laser-cladding CoCrFeMoNi high-entropy alloy coating is composed of face-centred cubic, σ and µ phases. After annealing at 700 °C, many needle-like precipitates of the σ phase are found in the FCC ...
-
Prior-β grain refinement of additive-manufactured Ti–6Al–4 V alloys via trace Si addition Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-18 Jian Gou, Ju Gao, Yuxuan Feng, Xuedong Bai, Dong Zhang, Yubo Wang, Zhengjun Liu
Although Ti–6Al–4 V alloys have unique properties, their fabrication and treatment processes should be improved further to enhance their quality. Therefore, a novel method has been developed and ap...
-
Effect of Cu/Sn additions on the precipitation and property in Al-Mg-Si alloys Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-18 Yaoyao Weng, Qichen Sun, Lipeng Ding, Jiahao Chen, Xiangxiang Cheng, Zhihong Jia, Manping Liu, Hua Zhao
The effects of Cu and Sn additions on the precipitation hardening of Al-Mg-Si alloys were systematically studied by performance testing and microscopic characterisation. Sn addition can retard the ...
-
Mechanical and microstructure behaviour of WSC/SiC/Al composites synthesized with and without ultrasonic treatment Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-06 P. Pragathi, R. Elansezhian, P. Sundaram, A. Subramania, R. Prabakaran, Sung Chul Kim
In this research, aluminium composites were fabricated using two alternative casting methods namely, traditional stir casting and ultrasonic-aided stir casting technique. The aluminium composites w...
-
Microcrystalline cellulose/graphene oxide aerogel for adsorption of cationic dye from aqueous solution Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-06-01 Maryam Hasanpour
Today, the increasing growth of industrial activities has caused the entry of large amounts of pollutants into water resources. Owing to the toxicity of these pollutants, their removal from water s...
-
Dissolution controlled grain growth in Nickel Alloy UDIMET 720Li Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-05-28 Manish Purushottam Meshram, Daniel Fabijanic, Rajkumar P. Singh, Matthew R. Barnett
The present paper examines the mechanisms for simultaneous manipulation of grain size and γ′ dissolution leading to the microstructure that balance creep and fatigue properties in UDIMET 720Li. For...
-
Solvo/hydrothermal upcycling of polyethylene plastic-waste into carbon-based nanocomposite for supercapacitor application Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-05-25 Moses Kigozi, Emmanuel Tebandeke, John Baptist Kirabira, Gabriel N. Kasozi
One of the most worrying environmental issues affecting all forms of life, the economy, and natural ecosystems globally is the accumulation of polyethylene (PE) plastic garbage. Creating peaceful a...
-
Effects of PMMT on microstructure and macrosegregation of large-sized 6061 alloy billet Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-05-25 Xinyu Bao, Yonglin Ma, Ruiyin Huang, Yongzhen Liu, Yuanlu Tang, Shuqing Xing
The pulsed magnetic field melt treatment (PMMT) was applied in the direct chill (DC) casting of 6061 alloy billets with a diameter of 430 mm. The results indicated that the billet solidification st...
-
Refinement behaviour of microstructure in in-situ synthesised (TiB+TiC)/Ti6Al4V composites by laser melting deposition Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-05-24 Hai Gu, Jie Zhang, Jianhua Sun, Guoqing Wu, Zhonggang Sun
Laser melting deposition (LMD) was used to stimulate the columnar to equiaxed transition (CET) of Ti6Al4V grains by adding a few of nano-B4C particles. The results showed that the grains were gradu...
-
Microstructural evolution of aluminium in dissimilar A1050/S45C FSW joints by Zn interlayer Mater. Sci. Technol. (IF 1.8) Pub Date : 2023-05-24 Mohamed Saleh, Yoshiaki Morisada, Kohsaku Ushioda, Hidetoshi Fujii
This study investigated the microstructural evolution of A1050 stir zones in dissimilar A1050/S45C friction stir-welded joints fabricated with 100- and 200-µm-thick Zn interlayers in addition to a ...