当前位置: X-MOL 学术Int. J. Refract. Met. Hard Mater. › 论文详情
Comparison of wear characteristics of diamond segments under different sawing modes in sawing hard stone
International Journal of Refractory Metals & Hard Materials ( IF 2.794 ) Pub Date : 2019-11-11 , DOI: 10.1016/j.ijrmhm.2019.105149
Shuo Wang, Jinsheng Zhang, Peiyu Dong

In this study, the wear characteristics of two kinds of diamond segments with different composition of matrix were compared and investigated under two sawing modes through an experiment. Diamond particles were studied through scanning electron microscopy and three dimensional imaging system. Then, the remaining height of diamond segments was measured by digital vernier caliper. The wear characteristics of diamond segments were analyzed from wear morphology, protrusion height of diamond particles and the remaining height of diamond segments. The motion of two sawing modes and their effects on trajectories were analyzed which presented that the rocking reciprocating sawing mode can reduce sawing length and sawing time compared with horizontal reciprocating sawing mode used daily in industry. The results of experiment demonstrated that the main wear mechanism attributed to diamond segments wear is the fracture and falling of diamond particles caused by heavy loads especially in rocking reciprocating sawing mode. The average protrusion height of diamond particles is related with loads and the bonding strength of matrix. However, diamond segments wear can be effectively reduced in rocking reciprocating sawing mode while cobalt-based segments were adopted because a higher bonding strength to diamond particles can be provided compared with iron-based segments. The matrix of segments can be abrased slower while sawing length and sawing time were reduced.
更新日期:2019-12-11

 

全部期刊列表>>
宅家赢大奖
向世界展示您的会议墙报和演示文稿
全球疫情及响应:BMC Medicine专题征稿
新版X-MOL期刊搜索和高级搜索功能介绍
化学材料学全球高引用
ACS材料视界
x-mol收录
自然科研论文编辑服务
南方科技大学
南方科技大学
西湖大学
中国科学院长春应化所于聪-4-8
复旦大学
课题组网站
X-MOL
深圳大学二维材料实验室张晗
中山大学化学工程与技术学院
试剂库存
天合科研
down
wechat
bug