当前位置: X-MOL 学术Synth. Met. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
One-step preparation of polyaniline-modified three-dimensional multilayer graphene supported PtFeOx for methanol oxidation
Synthetic Metals ( IF 4.4 ) Pub Date : 2022-04-07 , DOI: 10.1016/j.synthmet.2022.117068
Ling Wang 1 , Mengyu Gan 1 , Li Ma 1 , Xuelian Hua 1 , Xudong Li 1 , Wei Zhao 1 , Yuchao Zhang 1
Affiliation  

In this paper, RGO/PANI/Pt@FeOx with a three-dimensional multilayer structure is successfully prepared by the one-pot method, in which the introduction of PANI prevents GO from agglomerating, and also plays a crucial supporting role in the three-dimensional multilayer structure. SEM and TEM images confirm that the catalyst has a three-dimensional multilayer structure, and Pt nanoparticles are uniformly dispersed on the surface of PANI/RGO, with an average particle size of 3.2 nm. The electrochemical evaluation clearly shows that the mass activity of 3D multilayer RGO/PANI/Pt@FeOx (1.573 Amg−1Pt) is three times than that of Pt/C. After 3600 s, it retained mass activity is seven times than that of Pt/C. In addition, 3D multilayer RGO/PANI/Pt@FeOx catalyst has better CO tolerance than Pt-RGO/PANI, Pt/C and Pt-RGO. These results mainly originate from that the three-dimensional multilayer structure provides a larger specific surface area, N species in PANI can be conducive to the uniform dispersion of platinum, and the existence of FeOx improves the catalytic efficiency of Pt and the rate of water splitting due to bi-functional mechanism, consequently enhancing the CO tolerance of catalyst. Thereby, 3D multilayer RGO/PANI/Pt@FeOx can be utilized as a promising methanol oxidation catalyst.



中文翻译:

一步制备聚苯胺修饰的三维多层石墨烯负载的 PtFeOx 用于甲醇氧化

本文采用一锅法成功制备了具有三维多层结构的RGO/PANI/Pt@FeO x ,其中 PANI 的引入防止了 GO 的团聚,同时在三者中也起到了至关重要的支撑作用。维多层结构。SEM和TEM图像证实催化剂具有三维多层结构,Pt纳米颗粒均匀分散在PANI/RGO表面,平均粒径为3.2 nm。电化学评估清楚地表明,3D 多层 RGO/PANI/Pt@FeO x (1.573 Amg -1 Pt ) 的质量活性是 Pt/C 的三倍。3600 s 后,它保留的质量活度是 Pt/C 的 7 倍。此外,3D 多层 RGO/PANI/Pt@FeOx催化剂比 Pt-RGO/PANI、Pt/C 和 Pt-RGO 具有更好的 CO 耐受性。这些结果主要源于三维多层结构提供了更大的比表面积,PANI中的N物种有利于铂的均匀分散,FeO x的存在提高了Pt的催化效率和出水率。由于双功能机制而分裂,从而提高了催化剂的CO耐受性。因此,3D 多层 RGO/PANI/Pt@FeO x可用作有前景的甲醇氧化催化剂。

更新日期:2022-04-07
down
wechat
bug