With this Corrigendum, the authors have corrected the following in their Full Paper:

1. SAED data images in Supporting Information Figure S5 have been removed post-publication. The molecule used here is a synthetically new substance, thus the data for single crystal X-ray measurements reported in this manuscript had not previously been deposited in the requisite database. We chose some corresponding pdf cards to normalize the lattice parameters, which may have caused some errors. In addition, one can see from the XRD results that amorphous structures were also present within the hierarchy. The diffraction spots in the SAED data correspond specifically to the interplanar spacing of the assemblies, however, not correctly to certain lattice parameters. Thus, it was decided it was best to remove these from the final version to avoid any confusion.

2. The HRTEM images clearly showed the interplanar spacing of the assemblies, demonstrating their crystalline structures. However, the HRTEM images displayed in the previous inset of Figure S5 were not matched very well with the SAED patterns. They belong to the same area, though with a certain deviation. For the sake of rigor, only the lattice spacings are now marked in Figure S5.

The corresponding revisions were thus made in the Version of Record:

1. In the section of “RPWM assembles in ethanol/H₂O (1/9)”, seventh paragraph, the description given is “High-resolution TEM (HRTEM) and select area electron diffraction (SAED) further confirmed the crystalline structure of RPWM assemblies (Figure S5a and c)” and should now be “High-resolution TEM (HRTEM) further confirmed the crystalline structure of RPWM assemblies (Figure S5a)”.

2. Also, In the section of “RPWM assemblies in ethanol/cyclohexane (1/9)”, second paragraph, the descriptions given are “Also, racemates in water (Figure 4k) and cyclohexane assembly exhibited similar XRD peaks, HRTEM and SAED images (Figure S5b and d)” and should be “Also, racemates in water and cyclohexane assembly exhibited similar XRD peaks (Figure 4k)”.

3. The blue square in Figure 4b had been incorrectly placed slightly too far to the left and for consistency, in was moved to the corrected position.

We apologize for these errors and for any inconvenience caused.

通过本勘误，作者在全文中更正了以下内容：

1. 支持信息图 S5 中的 SAED 数据图像已在发布后删除。这里使用的分子是一种合成新物质，因此本手稿中报告的单晶 X 射线测量数据以前没有存放在必要的数据库中。我们选择了一些对应的pdf卡对晶格参数进行归一化，可能造成了一些误差。此外，从 XRD 结果中可以看出，层次结构中也存在无定形结构。SAED 数据中的衍射点特别对应于组件的晶面间距，但与某些晶格参数不正确。因此，决定最好从最终版本中删除这些以避免任何混淆。

2. HRTEM 图像清楚地显示了组件的晶面间距，展示了它们的晶体结构。然而，在图 S5 的前一个插图中显示的 HRTEM 图像与 SAED 模式不太匹配。它们属于同一个区域，但有一定的偏差。为了严谨起见，现在仅在图 S5 中标记了晶格间距。

因此在记录版本中进行了相应的修订：

1. 在“RPWM assembles in ethanol/H ₂ O (1/9)”部分，第七段，给出的描述是“高分辨率TEM（HRTEM）和选区电子衍射（SAED）进一步证实了晶体结构RPWM 组件（图 S5a 和 c）”，现在应该是“高分辨率 TEM（HRTEM）进一步证实了 RPWM 组件的晶体结构（图 S5a）”。

2. 另外，在“乙醇/环己烷 (1/9) 中的 RPWM 组件”部分的第二段中，给出的描述是“此外，水中的外消旋物（图 4k）和环己烷组件表现出相似的 XRD 峰、HRTEM 和 SAED图像（图 S5b 和 d）”，并且应该是“此外，水和环己烷中的外消旋体表现出相似的 XRD 峰（图 4k）”。

3. 图 4b 中的蓝色方块被错误地放置在稍微偏左的位置，为了保持一致性，将 in 移到了正确的位置。

对于这些错误以及由此造成的任何不便，我们深表歉意。