当前位置:
X-MOL 学术
›
Theor. Found. Chem. Eng.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Dynamics of Heat and Mass Transfer during the Injection of Dispersed Adsorbent into Steam-Gas Flow
Theoretical Foundations of Chemical Engineering ( IF 0.8 ) Pub Date : 2021-10-25 , DOI: 10.1134/s0040579521030209 M. I. Shilyaev 1 , E. M. Khromova 1
中文翻译:
分散吸附剂注入蒸汽-气流过程中的传热传质动力学
更新日期:2021-10-26
Theoretical Foundations of Chemical Engineering ( IF 0.8 ) Pub Date : 2021-10-25 , DOI: 10.1134/s0040579521030209 M. I. Shilyaev 1 , E. M. Khromova 1
Affiliation
Abstract
Physical and mathematical simulation of the process of adsorption of gas components on the adsorbent injected into the steam-air flow in a cylindrical tube and Venturi tube was carried out. Calculated estimates of CO2 adsorption on aluminosilicate with a mass median particle size of 50 µm were carried out using the phase equilibrium coefficient found by the authors in [1] by comparing the calculated and experimental data from [2]. The analysis of adsorption process under the considered conditions is carried out and practical conclusions were made.
中文翻译:
分散吸附剂注入蒸汽-气流过程中的传热传质动力学
摘要
对注入到圆柱管和文丘里管中的蒸汽-空气流中的吸附剂吸附气体成分的过程进行了物理和数学模拟。使用作者在 [1] 中发现的相平衡系数,通过比较 [2] 中的计算数据和实验数据,对质量中值粒径为 50 µm 的铝硅酸盐上的 CO 2吸附进行了计算估计。对所考虑条件下的吸附过程进行了分析,并得出了实际结论。