Mineral Processing and Extractive Metallurgy Review ( IF 5 ) Pub Date : 2021-10-03 , DOI: 10.1080/08827508.2021.1986707 Guilherme José Ramos Oliveira 1, 2 , Daniela Gomes Horta 2 , Fabiane Leocádia da Silva 3 , Fernando Leopoldo von Krüger 4, 5 , Fernando Gabriel da Silva Araújo 4, 5 , Douglas Batista Mazzinghy 1
ABSTRACT
Microscope-based automated image analysis systems have been used to obtain data regarding mineral liberation. However, this kind of analysis leads to stereological bias due to the intrinsic two-dimensionality characteristic of the technique. Three-dimensional imaging techniques such as X-ray microtomography comes as an alternative method to measure liberation. We explored the potentiality of high-resolution X-ray microtomography to investigate the characteristics of liberation of a Brazilian bauxite. Grade distributions in 2D and 3D were correspondent when all possible cross-sections were considered in 2D. However, 2D surface exposure did not converge accurately to the 3D method due to the loss of 3D information.
中文翻译:
使用 X 射线显微断层扫描基于 3D 成分和纹理特征确定铝土矿的矿物释放
摘要
基于显微镜的自动图像分析系统已被用于获取有关矿物释放的数据。然而,由于该技术固有的二维特性,这种分析会导致立体偏差。三维成像技术(如 X 射线显微断层扫描)是测量解放的另一种方法。我们探索了高分辨率 X 射线显微断层扫描技术研究巴西铝土矿释放特征的潜力。当在 2D 中考虑所有可能的横截面时,2D 和 3D 中的等级分布是对应的。然而,由于 3D 信息的丢失,2D 表面曝光并没有准确地收敛到 3D 方法。