当前位置: X-MOL 学术Int. J. RF Microw. Comput.-Aided Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design of balanced to balanced filtering power divider based on right triangle substrate integrated waveguide cavity
International Journal of RF and Microwave Computer-Aided Engineering ( IF 1.7 ) Pub Date : 2021-06-04 , DOI: 10.1002/mmce.22766
Jian Zheng 1 , Xin Zhou 1 , Wanchun Tang 1 , Yijie Liu 1 , Gang Zhang 1 , Hua Yang 2 , Jiquan Yang 1
Affiliation  

A new balanced to balanced (BTB) filtering power divider (FPD) based on right triangle substrate integrated waveguide (SIW) cavity is proposed in this article. TE120-mode is used in four SIW right triangle cavities to realize required differential-mode (DM) transmission and common-mode (CM) suppression. Grounded resistors are loaded between DM output ports to obtain port-to-port isolation. The transmission zero out of the passband is generated by suppressing the TE210 mode. A prototype BTB FPD operating at 14.91 GHz is designed, fabricated, and measured for verification. Good accordance between simulation and measurement can be observed.

中文翻译:

基于直角基片集成波导腔的平衡到平衡滤波功分器设计

本文提出了一种基于直角三角形衬底集成波导(SIW)腔的新型平衡到平衡(BTB)滤波功率分配器(FPD)。TE 120模式用于四个 SIW 直角三角形腔,以实现所需的差模 (DM) 传输和共模 (CM) 抑制。DM 输出端口之间加载接地电阻以获得端口到端口的隔离。通带外的传输零是通过抑制 TE 210模式产生的。在 14.91 GHz 运行的原型 BTB FPD 被设计、制造和测量以进行验证。可以观察到模拟和测量之间的良好一致性。
更新日期:2021-08-03
down
wechat
bug