Abstract

Composite Langmuir–Blodgett coatings of cerotinic acid with boron nitride of the hexagonal allotropic modification (α-BN) were formed by horizontal deposition on silicon and steel surfaces. Their morphology and tribological properties were studied. It was shown that the incorporation of α-BN particles into cerotinic acid monolayers increases their wear resistance by 3.5 and 3.0 times on silicon and steel, respectively. The presence of α-BN particles and their aggregates ranging in size from ~600 nm to 7.0 μm in cerotinic acid layers was confirmed by scanning electron microscopy.

中文翻译：

---

硅酸与氮化硼Langmuir-Blogett复合涂层的摩擦学性能

摘要

通过在硅和钢表面上水平沉积，形成了六方同素异形改性的氮化硼与陶瓷酸的Langmuir–Blodgett复合涂层。研究了它们的形态和摩擦学特性。结果表明，将α-BN颗粒掺入到鲸蜡酸单层中，在硅和钢上的耐磨性分别提高了3.5倍和3.0倍。通过扫描电子显微镜确认了α-BN颗粒及其聚集体的存在，其尺寸在约600 nm至7.0μm的范围内。