当前位置: X-MOL 学术Laser Phys. Lett. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
1940 nm, 1966 nm and 2066 nm multi-wavelength CW and passively-Q-switched operation of L-shaped Tm3+:Lu2O3 ceramic laser in-band fiber-laser pumped at 1670 nm
Laser Physics Letters ( IF 1.7 ) Pub Date : 2021-04-19 , DOI: 10.1088/1612-202x/abf5d0
O L Antipov 1, 2, 3 , Yu A Getmanovskiy 1, 4 , S S Balabanov 5 , S V Larin 6 , V V Sharkov 1, 2
Affiliation  

A Tm3+:Lu2O3 ceramics laser with the L-shaped cavity in-band pumped by a fiber laser at 1670 nm was studied in CW and passively Q-switched multi-wavelength regimes. The CW laser operated at 2066 nm at the weak pump power and self-tuned to 1966 nm and further to 1940 nm at higher pump power. The maximum power in the CW regime at 1940 nm reached 9.5 W, while the average power of 3.6 W was registered in the Q-switched regime with the pulse repetition rate of 110–170 kHz and the pulse duration of 200–240 ns. The Q-switched operation was obtained using a Cr2+:ZnSe saturable absorber. Pulsed regime started at the shortest wavelength of 1940 nm and self-tuned to the double-wavelength of 1940 nm and 1966 nm at higher pump power.



中文翻译:

1940 nm、1966 nm 和 2066 nm 多波长连续波和 L 形 Tm3+:Lu2O3 陶瓷激光器在 1670 nm 泵浦的带内光纤激光器的被动调Q操作

在 CW 和被动调 Q 多波长范围内研究了具有 L 形腔带内泵浦的Tm 3+ :Lu 2 O 3陶瓷激光器,波长为 1670 nm。CW 激光器在弱泵浦功率下工作在 2066 nm,并自调谐至 1966 nm,并在更高泵浦功率下进一步至 1940 nm。在 1940 nm CW 范围内的最大功率达到 9.5 W,而在 Q 开关范围内记录的平均功率为 3.6 W,脉冲重复率为 110-170 kHz,脉冲持续时间为 200-240 ns。使用 Cr 2+ :ZnSe 可饱和吸收器获得 Q 开关操作。脉冲状态从最短的 1940 nm 波长开始,并在更高的泵浦功率下自调谐至 1940 nm 和 1966 nm 的双波长。

更新日期:2021-04-19
down
wechat
bug