当前位置: X-MOL 学术Indoor Built Environ. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Assessment of process parameters in a dehumidification process using biomass-based wood shaving as a packing material
Indoor and Built Environment ( IF 3.6 ) Pub Date : 2021-04-23 , DOI: 10.1177/1420326x211008509
Sampath Suranjan Salins 1 , S. V. Kota Reddy 2 , Shiva Kumar 3
Affiliation  

In the current study, the performance of the counterflow dehumidification test rig using wood shaving packing has been analysed. Wood shaving packing with the density 500 kg/m3 was used along with the CaCl2 desiccant with varying concentration. Mass flow rate of air was varied and the dehumidification performance parameters like moisture removal rate, dehumidification efficiency, coefficient of performance, change in relative humidity, change in the pressure and mass transfer coefficient were evaluated. Output parameters were compared with the commercially available cellulose packing with the wettability of 632 m2/m3. Results showed that, even though the performance of wood shaving packing is slightly less than the Celdek packing, performance of wood shaving is promising at 40% desiccant solution concentration. Maximum relative humidity difference, coefficient of performance and dehumidification efficiency obtained with wood shaving pad material were found to be 19%, 1.88 and 69.5%, respectively.



中文翻译:

使用基于生物质的刨花作为包装材料评估除湿过程中的过程参数

在当前的研究中,已经分析了使用刨花填料的逆流除湿试验台的性能。使用密度为500 kg / m 3的刨花盘根以及浓度不同的CaCl 2干燥剂。改变空气的质量流量,并评估除湿性能参数,如除湿率,除湿效率,性能系数,相对湿度的变化,压力和传质系数的变化。将输出参数与可湿性为632 m 2 / m 3的市售纤维素填料进行比较。结果表明,尽管刨花盘根的性能略低于Celdek盘根,但在40%的干燥剂溶液浓度下,刨花的性能仍有望。用刨花垫材料获得的最大相对湿度差,性能系数和除湿效率分别为19%,1.88和69.5%。

更新日期:2021-04-24
down
wechat
bug