当前位置: X-MOL 学术Comput. Commun. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Providing a CoAP-based technique to get wireless sensor data via IoT gateway
Computer Communications ( IF 6 ) Pub Date : 2021-03-31 , DOI: 10.1016/j.comcom.2021.03.026
Mohammad Reza Nikseresht , Mahdi Mollamotalebi

The advancement of wireless sensor networks and the possibility of using Internet protocols in devices with limited resources (such as sensors) have changed the future of the Internet. How to interact and exchange information is one of the challenges in the Internet of Things (IoT). The 6LoWPAN (IP6 Low Power Wireless Personal Area Network) and CoAP (Constrained Application Protocol) standards have been developed for using web protocols in sensor-based LLN (Low-power and Lossy Network). The 6LoWPAN/CoAP protocol stack enables access to the sensor network via web protocols. This facilitates the development of applications on the sensor network and their access to the Internet. Each of the layers of the 6LoWPAN/CoAP protocol stack imposes an overhead on the transmitted messages, and the resulting data overhead intensifies the energy consumption in multi-hop networks. In this paper, a technique is provided to reduce the burden imposed on small and medium-size packets on 6LoWPAN/CoAP multi-hop networks by scheduling and aggregating CoAP packets on sensor nodes. It classifies the CoAP requests/responses over the network (by specifying the maximum allowed delay) and manages the timing and aggregation of received messages on the sensor nodes (based on the maximum allowed delay on each one). The results of the evaluation of the provided technique indicated reducing the power consumption and network traffic for applications such as monitoring in multi-hop networks based on the 6LoWPAN/CoAP protocol stack.



中文翻译:

提供基于CoAP的技术以通过IoT网关获取无线传感器数据

无线传感器网络的发展以及在资源有限的设备(例如传感器)中使用Internet协议的可能性改变了Internet的未来。如何交互和交换信息是物联网(IoT)的挑战之一。已经开发了6LoWPAN(IP6低功耗无线个人局域网)和CoAP(受限应用协议)标准,以在基于传感器的LLN(低功耗有损网络)中使用Web协议。6LoWPAN / CoAP协议栈允许通过Web协议访问传感器网络。这促进了传感器网络上应用程序的开发以及它们对Internet的访问。6LoWPAN / CoAP协议栈的每一层都在传输的消息上增加了开销,并且产生的数据开销增加了多跳网络中的能耗。在本文中,提供了一种通过调度和聚合传感器节点上的CoAP数据包来减轻6LoWPAN / CoAP多跳网络上的中小型数据包负担的技术。它对网络上的CoAP请求/响应进行分类(通过指定最大允许的延迟),并管理传感器节点上接收到的消息的时间和聚合(基于每个节点上的最大允许的延迟)。对所提供技术的评估结果表明,针对基于6LoWPAN / CoAP协议栈的多跳网络中的监视等应用,可以降低功耗和网络流量。提供了一种通过调度和聚合传感器节点上的CoAP数据包来减轻施加在6LoWPAN / CoAP多跳网络上的中小型数据包的负担的技术。它对网络上的CoAP请求/响应进行分类(通过指定最大允许的延迟),并管理传感器节点上接收到的消息的时间和聚合(基于每个节点上的最大允许的延迟)。对所提供技术的评估结果表明,针对基于6LoWPAN / CoAP协议栈的多跳网络中的监视等应用,可以降低功耗和网络流量。提供了一种通过调度和聚合传感器节点上的CoAP数据包来减轻施加在6LoWPAN / CoAP多跳网络上的中小型数据包的负担的技术。它对网络上的CoAP请求/响应进行分类(通过指定最大允许的延迟),并管理传感器节点上接收到的消息的时间和聚合(基于每个节点上的最大允许的延迟)。对所提供技术的评估结果表明,针对基于6LoWPAN / CoAP协议栈的多跳网络中的监视等应用,可以降低功耗和网络流量。它对网络上的CoAP请求/响应进行分类(通过指定最大允许的延迟),并管理传感器节点上接收到的消息的时间和聚合(基于每个节点上的最大允许的延迟)。对所提供技术的评估结果表明,针对基于6LoWPAN / CoAP协议栈的多跳网络中的监视等应用,可以降低功耗和网络流量。它对网络上的CoAP请求/响应进行分类(通过指定最大允许的延迟),并管理传感器节点上接收到的消息的时间和聚合(基于每个节点上的最大允许的延迟)。对所提供技术的评估结果表明,针对基于6LoWPAN / CoAP协议栈的多跳网络中的监视应用,可以降低功耗和网络流量。

更新日期:2021-03-31
down
wechat
bug