This study examines properties of the cotton/polyamide plain plated commercial socks (CO 81%/PA 19%) and pure polyamide fabric subjected to the multifunctional treatment by a sol-gel coating technique where tetraethyl-orthosilicate (TEOS) and zinc acetate dihydrate (ZAD) were used as precursors. Commercially available sock is produced on a single cylinder sock knitting machine which results in two surfaces (cotton and polyamide), with dissimilar characteristics thus leading to necessity of their separate studies. Experimental part examines surface structural clarification and compound identification using infrared spectroscopy. To assess the impact of modification such properties as air permeability must be tested and analysed. Pilot tests of antibacterial activity against Bacillus subtilis mscL 1141 and Staphylococcus aureus mscL 334 where carried out. Due to the modification consolidation treatment temperature below the destruction of material and the chemical compounds vibrational modes overlap, but in regions 1170–1650 cm⁻¹ and 3200–3395 cm⁻¹ show the presence of bounds corresponding to sol-gel coating presence on the surface.

这项研究研究了棉/聚酰胺平纹商业袜子（CO 81％/ PA 19％）和纯聚酰胺织物的性能，这些织物通过溶胶-凝胶涂覆技术进行了多功能处理，其中原硅酸四乙酯（TEOS）和二水合乙酸锌（ ZAD）用作前体。市售的袜子是在单筒袜子编织机上生产的，其结果是两个表面（棉和聚酰胺）具有不同的特性，因此需要进行单独研究。实验部分使用红外光谱检查表面结构的澄清度和化合物鉴定。为了评估修改的影响，必须测试和分析诸如透气性之类的属性。进行了针对枯草芽孢杆菌mscL 1141和金黄色葡萄球菌mscL 334的抗菌活性的初步测试。由于改性固结处理温度低于材料的破坏和化合物的振动模态重叠，但在1170–1650 cm区域^-1和3200-3395 cm ^-1显示相应于表面上存在溶胶-凝胶涂层的结合物。