当前位置: X-MOL 学术Chem. Eng. Technol. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Experimental Evaluation Using Plastic Waste, Paper Waste, and Coal as Fuel in a Chemical Looping Combustion Batch Reactor
Chemical Engineering & Technology ( IF 2.1 ) Pub Date : 2021-03-16 , DOI: 10.1002/ceat.202000501
Zainab Temitope Yaqub 1 , Bilainu Obozokhai Oboirien 1 , Marcus Hedberg 2 , Henrik Leion 2
Affiliation  

A comparative study of chemical looping combustion (CLC) with paper, plastic, and coal as fuel was carried out. Experiments were performed in a laboratory fluidized‐bed reactor by alternating between reduction and oxidation cycles. The results obtained indicated that a higher temperature leads to an increase in the CO2 yield and carbon conversion for all fuels. Paper had the highest fractional conversion of CO to CO2 followed by polyvinyl chloride (PVC) and coal. This was due to the higher fraction of volatiles in paper compared to PVC and coal. Scanning electron microscopy (SEM) analysis of the oxygen carrier particle after each of the solid fuel experiment was carried out. For the used ilmenite, there was a slight difference in the morphology for the three different fuels.

中文翻译:

在化学循环燃烧间歇反应器中以塑料废料,纸屑和煤为燃料的实验评估

进行了以纸,塑料和煤为燃料的化学循环燃烧(CLC)的比较研究。通过在还原和氧化循环之间进行交替,在实验室流化床反应器中进行了实验。获得的结果表明,较高的温度导致所有燃料的CO 2产率和碳转化率增加。纸的CO至CO 2的分馏率最高,其次是聚氯乙烯(PVC)和煤。这是由于与PVC和煤炭相比,纸张中的挥发物含量更高。在每个固体燃料实验之后,对氧载体颗粒进行扫描电子显微镜(SEM)分析。对于用过的钛铁矿,三种不同燃料的形态略有不同。
更新日期:2021-05-17
down
wechat
bug