当前位置: X-MOL 学术Surf. Rev. Lett. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
FABRICATION OF PROTECTIVE SiC/TiO2/SiO2 COATING FOR GRAPHITE ELECTRODES
Surface Review and Letters ( IF 1.1 ) Pub Date : 2021-03-05 , DOI: 10.1142/s0218625x21500384
HOSSEIN ALIAN MOGHADAM 1 , MAJID JABBARI 1 , SAEED DANESHMAND 1, 2 , SAEID RASOULI JAZI 1 , AREZOO KHOSRAVI 1
Affiliation  

Today, there is a rapid growing demand for graphite electrodes used at steel making factories. Graphite electrodes are expensive materials that are used at steel making factories. Increasing the working longevity of these materials can significantly improve the benefit of steel melting process. Therefore, the increase in the stability of graphite at high elevated temperatures in electric arc furnaces is necessary. The mixture of SiC/TiO2/SiO2 coating can desirably reduce the oxidation of the graphite matrix at high temperatures. Evidently, the SiC/TiO2/SiO2 coating can specially decrease the mass loss rate of the graphite at high elevated temperatures and improve its working longevity in these conditions. Moreover, this coating can effectively improve the stability and thermal shock properties of graphite at the temperatures up to 1000C.

中文翻译:

石墨电极保护性 SiC/TiO2/SiO2 涂层的制造

如今,炼钢厂对石墨电极的需求快速增长。石墨电极是用于炼钢厂的昂贵材料。增加这些材料的工作寿命可以显着提高炼钢工艺的效益。因此,提高石墨在电弧炉中高温下的稳定性是必要的。SiC/TiO 2 /SiO 2涂层的混合物可以理想地减少石墨基体在高温下的氧化。显然,SiC/TiO 2 /SiO 2涂层可以特别降低石墨在高温下的质量损失率并提高其在这些条件下的工作寿命。此外,该涂层可有效提高石墨在高达 1000 C的温度下的稳定性和热冲击性能。
更新日期:2021-03-05
down
wechat
bug