Journal of Alloys and Compounds ( IF 6.2 ) Pub Date : 2021-02-23 , DOI: 10.1016/j.jallcom.2021.159301 Carla Isabel Pinilla Ducreux , Ahmed A. Saleh , Azdiar A. Gazder , Elena V. Pereloma
The deformation behaviour of a metastable β Ti-10V-2Fe-3Al (wt%) alloy containing ~10 vol% α phase was investigated via single-peak fitting and Rietveld refinement of in-situ neutron diffraction data collected during uniaxial tension. The formation of the fibre is related to martensite variant selection during β → α″ transformation under applied load. The β lattice parameter increases by ~0.08% during tension whereas α″ accommodates deformation through a decrease and increase in a and b lattice parameters, respectively. The origin of the variation in α″ martensite lattice parameters with strain for different Ti alloys is linked to their different rhombicity values.
中文翻译:
一个原位马氏体相变的在亚稳β的Ti-10V-的2Fe-3AL合金单轴拉伸期间中子衍射调查
通过单峰拟合和在单轴拉伸过程中收集的原位中子衍射数据的Rietveld改进,研究了含约10%(体积)α相的亚稳态βTi-10V-2Fe-3Al(wt%)合金的变形行为。的形成纤维与外加载荷下β→α''转变过程中的马氏体变体选择有关。在拉伸过程中,β晶格参数增加〜0.08%,而α''通过分别减小和增大a和b晶格参数来适应变形。不同Ti合金的α”马氏体晶格参数随应变变化的起源与它们不同的菱形度值有关。