当前位置:
X-MOL 学术
›
Arms & Armour
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Henry Nock, Walter Dick and Charles Lennox, The Duke of Richmond, and the Journey to the Final Designs of the Nock screwless lock
Arms & Armour Pub Date : 2016-01-02 , DOI: 10.1080/17416124.2016.1191742 David Williams
Arms & Armour Pub Date : 2016-01-02 , DOI: 10.1080/17416124.2016.1191742 David Williams
This paper introduces the Duke of Richmond’s Muskets and their precursors as made by Henry Nock and others. It particularly explores the development pathway for Nock’s Screwless locks by examining the production variants, the known prototype and experimental versions and in particular the prototype breech loading muskets. There are now known to be three breech loading prototypes, two very similar guns with locks marked by Henry Nock and a similar gun that appears by comparison to locks known to be by Walter Dick to have a lock made by Dick. This examination indicates that Nock was likely to have been instructed to make the production lock smaller than the prototype and that a key design step that enabled this was the use of a small double-ended mainspring linked to the cock and actuating the steel (frizzen) via a lever as developed by Dick.
中文翻译:
亨利·诺克、沃尔特·迪克和查尔斯·伦诺克斯、里士满公爵和诺克无螺丝锁的最终设计之旅
本文介绍了由亨利·诺克 (Henry Nock) 等人制作的里士满公爵的火枪及其前身。它通过检查生产变体、已知的原型和实验版本,特别是原型后膛装载步枪,特别探索了诺克无螺丝锁的开发途径。现在已知有三种后膛装载原型,两把非常相似的枪带有亨利诺克标记的锁和一把类似的枪,与沃尔特迪克已知的带有迪克制造的锁的锁相比出现。这项检查表明,诺克很可能被指示将生产锁制造得比原型更小,并且实现这一目标的关键设计步骤是使用与旋塞相连的小型双头主发条并驱动钢(毛躁)通过 Dick 开发的杠杆。
更新日期:2016-01-02
中文翻译:
亨利·诺克、沃尔特·迪克和查尔斯·伦诺克斯、里士满公爵和诺克无螺丝锁的最终设计之旅
本文介绍了由亨利·诺克 (Henry Nock) 等人制作的里士满公爵的火枪及其前身。它通过检查生产变体、已知的原型和实验版本,特别是原型后膛装载步枪,特别探索了诺克无螺丝锁的开发途径。现在已知有三种后膛装载原型,两把非常相似的枪带有亨利诺克标记的锁和一把类似的枪,与沃尔特迪克已知的带有迪克制造的锁的锁相比出现。这项检查表明,诺克很可能被指示将生产锁制造得比原型更小,并且实现这一目标的关键设计步骤是使用与旋塞相连的小型双头主发条并驱动钢(毛躁)通过 Dick 开发的杠杆。