The pyrolysis characteristic of furniture processing residue (FPR), which was analyzed by thermogravimetric analysis (TGA) under nitrogen atmosphere, mainly decomposed between 230 °C and 500 °C. The FPR was submitted to fast pyrolysis in a bubbling fluidized-bed reactor (BFR) for converting into bio-oil, bio-char. The product distribution and characteristics of bio-oil depend on the operating conditions (temperature, fluidizing flow rate, particle size of sample). The bio-oil yield showed the highest value (50.68 wt%) at the pyrolysis temperature of 450 °C with a biomass particle size of 1.0 mm and a fluidization velocity of 2.0×U_mf. The bio-oil had high selectivity for dioctyl phthalate, levoglucosan, and phenolic derivatives. The carbon number proportions in bio-oils of FPR were 32.74 wt% for C₅–C₁₁ fraction, 47.60 wt% for C₁₂–C₁₈ fraction and 19.38 wt% of C₂₅–C₃₈ fraction, respectively. The gas product included CO, CO₂, H₂, and hydrocarbons (C₁–C₄), and the selectivity of CO₂ was the highest. The high heating value (HHV) of gas products was between 4.60 and 12.90 MJ/m³. The bio-char shows high HHV (23.87 MJ/kg) and high C content (62.47 wt%) that can be applied as a solid fuel.

家具加工残渣（FPR）的热解特性是在氮气氛下通过热重分析（TGA）进行分析的，主要在230°C至500°C之间分解。将FPR在鼓泡的流化床反应器（BFR）中进行快速热解，以转化为生物油，生物炭。生物油的产品分布和特性取决于操作条件（温度，流化流速，样品的粒径）。在450°C的热解温度下，生物油收率最高（50.68 wt％），生物质粒径为1.0 mm，流化速度为2.0×U _mf。该生物油对邻苯二甲酸二辛酯，左旋葡聚糖和酚类衍生物具有高选择性。对于C ₅，FPR生物油中的碳数比例为32.74 wt％–C ₁₁馏分，C ₁₂ –C ₁₈馏分的47.60 wt％和C ₂₅ –C ₃₈馏分的19.38 wt％。气体产物包括CO，CO ₂，H ₂和碳氢化合物（C ₁ -C ₄），CO ₂的选择性最高。气体产品的高热值（HHV）在4.60和12.90 MJ / m ^3之间。该生物炭显示出高HHV（23.87 MJ / kg）和高C含量（62.47 wt％），可以用作固体燃料。