Tribology International ( IF 6.2 ) Pub Date : 2021-02-03 , DOI: 10.1016/j.triboint.2021.106916 Enes Kilincarslan , Sena Kabave Kilincarslan , M. Huseyin Cetin
In this study, the tribological performance of cutting fluid developed with canola oil and nano-silver was investigated. Within the scope of the study, AA7075-T6 material was milled under the conditions of dry machining, boron oil, canola oil, and nano-silver added canola oil. As a result of the experiments, surface roughness, cutting forces, cutting temperature, chip morphologies, and tool wear were investigated. Nano-lubricant caused a slight increase in the machining forces, but it provided high performance in terms of surface roughness, cutting temperature, chip morphology and tool wear. As a result of the optimisation, the nano-silver added cutting fluid was determined to be optimum in terms of surface roughness and cutting temperature.
中文翻译:
考虑摩擦性能和成本参数的清洁纳米切削液评估
在这项研究中,研究了用菜籽油和纳米银开发的切削液的摩擦学性能。在研究范围内,AA7075-T6材料是在干加工,硼油,低芥酸菜籽油和添加纳米银的低芥酸菜籽油的条件下进行研磨的。作为实验的结果,研究了表面粗糙度,切削力,切削温度,切屑形态和刀具磨损。纳米润滑剂使加工力略有增加,但在表面粗糙度,切削温度,切屑形态和工具磨损方面提供了高性能。作为优化的结果,就表面粗糙度和切削温度而言,确定添加纳米银的切削液是最佳的。