当前位置: X-MOL 学术Intermetallics › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Facile sonochemical synthesis of silver nanoparticle and graphene oxide deposition on bismuth doped manganese oxide nanotube composites for electro-catalytic sensor and oxygen reduction reaction (ORR) applications
Intermetallics ( IF 4.4 ) Pub Date : 2021-01-17 , DOI: 10.1016/j.intermet.2021.107101
Rajabathar Jothi Ramalingam , Prabhakarn Arunachalam , Mabrook S. Amer , Zeid A. AlOthman , Abdullah G. Alanazi , Murefah M. AL-Anazy , Hamad A AL-Lohedan , Wasmiah Mohammed Dahan

Pristine silver nanoparticles and silver-graphene oxide nanoparticles have incorporated in Bismuth doped manganese oxide (Bi-MnOx) nanotubes by an ultra-sonication deposition method. Pristine Bismuth doped porous MnO2 has prepared by a non-ionic surfactant (Triton-X-100) assisted co-precipitation and heat treatment process. In the second stage, the biogenic method prepared very fine Ag nanoparticles with a quantum dot size of particles (below 10 nm). They have further deposited on the dried powder of Bi-MnOx by ultra-sonication fabricate the composite material for electrode application. The pure nanotube formation obtained for silver nanoparticle deposited Bi-MnOx (Ag-BiMnOx) and silver/GO nanoparticle(Ag-BiMnOx/GO) nanocomposites have clearly confirmed by high resolution transmission electron micrographs (HR-TEM). The nanotube diameter obtained in the range of 10–25 nm and length of nanotube obtained in the rage of 40–50 nm. Enhanced thermal stability has achieved for Ag-BiMnOx and Ag-BiMnOx/GO composite compared to pristine manganese oxide. Band gap values of prepared compoiste is calculated from Diffuse reflectance spectral data provide the bandgap values of Ag–Bi-MnOx/GO (1.93 eV) and Bi-MnOx (2.47 eV). As prepared graphene oxide modified Bi-MnOx composite modified electrode have further analyzed for hydrogen peroxide sensor and Oxygen reduction reactions (ORR). Silver nanoparticle-graphene oxide modified Bi-MnOx composite shows an enhanced electrochemical capacitance activity of 2.61 mF and improved electrochemical surface area of 65.25 cm2 towards clean energy technology application.



中文翻译:

便捷的声化学合成银纳米粒子和氧化石墨烯沉积在铋掺杂的氧化锰纳米管复合材料上,用于电催化传感器和氧还原反应(ORR)应用

原始的银纳米颗粒和银氧化石墨烯纳米颗粒已通过超声沉积法掺入铋掺杂的氧化锰(Bi-MnOx)纳米管中。原始铋掺杂多孔MnO 2已经制备了由非离子表面活性剂(Triton-X-100)辅助的共沉淀和热处理工艺。在第二阶段中,生物生成方法制备了非常细的Ag纳米颗粒,其颗粒的量子点尺寸(小于10 nm)。通过超声处理,它们进一步沉积在Bi-MnOx的干燥粉末上,制成用于电极的复合材料。高分辨率透射电子显微照片(HR-TEM)清楚地证实了银纳米颗粒沉积Bi-MnOx(Ag-BiMnOx)和银/ GO纳米颗粒(Ag-BiMnOx / GO)纳米复合材料获得的纯纳米管形成。获得的纳米管直径在10–25 nm范围内,获得的纳米管长度在40–50 nm范围内。与原始锰氧化物相比,Ag-BiMnOx和Ag-BiMnOx / GO复合材料具有更高的热稳定性。制备的复合材料的带隙值是根据漫反射光谱数据计算得出的,其中Ag-Bi-MnOx / GO(1.93 eV)和Bi-MnOx(2.47 eV)的带隙值。所制备的氧化石墨烯修饰的Bi-MnOx复合修饰电极已进一步分析过氧化氢传感器和氧还原反应(ORR)。银纳米粒子-氧化石墨烯修饰的Bi-MnOx复合材料显示出2.61 mF的增强的电化学电容活性和65.25 cm的改善的电化学表面积2.走向清洁能源技术的应用。

更新日期:2021-01-18
down
wechat
bug