当前位置: X-MOL 学术Ain Shams Eng. J. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Impact of sustainable design in the construction sector on climate change
Ain Shams Engineering Journal ( IF 6 ) Pub Date : 2020-12-02 , DOI: 10.1016/j.asej.2020.11.002
Noha Ahmed , Mohamed Abdel-Hamid , Mahmoud M. Abd El-Razik , Karim M. El-Dash

The demand to reduce the greenhouse gases (GHGs) is a must to address the problem of climate change. This paper aims to help the decision makers locally and internationally to reduce the building's CO2 emissions in the project design phase. The paper studies the indoor CO2 emissions of green and conventional building. The assessment of embodied carbon of a green building material has been studied. It was found that the reinforced concrete has the significant negative impact, as it represents 78% of the total embodied carbon emissions. On the other hand, the insulation materials represent (2%) of the total emissions. Heavyweight cast concrete and the autoclaved aerated concrete have been proposed as alternatives, it was found that they achieved 23% & 50% reduction in the total embodied carbon emissions respectively. It is recommended to use autoclaved aerated concrete component as environmental alternative to reinforced concrete.



中文翻译:

建筑行业可持续设计对气候变化的影响

减少温室气体(GHG)的需求是解决气候变化问题的必要条件。本文旨在帮助本地和国际决策者在项目设计阶段减少建筑物的 CO 2排放。该论文研究了室内 CO 2绿色和传统建筑的排放。已经研究了绿色建筑材料的隐含碳的评估。研究发现,钢筋混凝土具有显着的负面影响,因为它占总隐含碳排放量的 78%。另一方面,绝缘材料占总排放量的 2%。重质浇注混凝土和蒸压加气混凝土已被提议作为替代方案,结果发现它们分别将总隐含碳排放量减少了 23% 和 50%。建议使用蒸压加气混凝土组件作为钢筋混凝土的环保替代品。

更新日期:2020-12-02
down
wechat
bug