Metrologia ( IF 2.4 ) Pub Date : 2020-11-16 , DOI: 10.1088/0026-1394/57/1a/08023 Emilio Prieto 1 , Ma Mar Pérez 1 , Juan A Ruíz 1 , Michael Matus 2 , Gerard Kotte 3
Supplementary comparison of distance measurements using pocket-type laser instruments (EDMs), following the previous comparison EURAMET.L-S20.
Originally proposed by CEM (ES) as billateral comparison with BEV (AT), after the open call made at the 2014 EURAMET TC-L meeting, VSL (NL) joined the comparison too.
Registered as Supplementary Comparison EURAMET.L-S25 with CEM acting as Coordinator and Pilot laboratory.
Transfer devices were two Leica DISTO EDMs, being the measurands the distances from the rear part of the EDMs to a target plate situated at 0.3 m and every 5 m until covering a range of 50 m.
Main text
To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the EURAMET and CCL WG-MRA, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
中文翻译:
补充比较EURAMET.L-S25(#1354)。袖珍型激光测距仪的比较
在先前比较EURAMET.L-S20之后,使用袖珍型激光仪器(EDM)进行距离测量的补充比较。
VSL(NL)最初由CEM(ES)提出与BEV(AT)进行双边比较,在2014年EURAMET TC-L会议上进行公开征集后,VSL(NL)也加入了比较。
注册为补充比较产品EURAMET.L-S25,由CEM担任协调员和试点实验室。
传输设备是两个Leica DISTO EDM,分别测量从EDM的后部到目标板的距离,该距离为0.3 m,每5 m直至覆盖50 m。
正文
要获得本文的正文,请单击“最终报告”。请注意,该文本显示在BIPM密钥比较数据库kcdb.bipm.org/的附录B中。
根据CIPM互认安排(CIPM MRA)的规定,最终报告已经由EURAMET和CCL WG-MRA进行了同行评审,并批准发布。