Titanium coating on diamond surface was treated with conventional and microwave salt bath plating methods. The composition and morphology of the coatings were analyzed by XRD, SEM, EDS and TEM. The results indicated that uniform and dense coatings were obtained on diamond particles after microwave-assisted salt bath plating at 850 °C for 20 min, while the deposition of titanium was incomplete by conventional heating salt bath treatment at 850 °C for 120 min. It indicates that a complete and dense titanium coating can be obtained on diamond surface at a lower temperature and a shorter time by microwave heating.

中文翻译：

---

新型快速低温盐浴镀覆法在金刚石颗粒表面镀钛

用常规和微波盐浴电镀方法处理金刚石表面的钛涂层。用XRD，SEM，EDS和TEM分析了涂层的组成和形貌。结果表明，在850°C的微波辅助盐浴下电镀20 min后，金刚石颗粒上获得了均匀致密的涂层，而常规的850°C的120 min加热盐浴处理则钛的沉积不完全。这表明通过微波加热，可以在较低的温度和较短的时间在金刚石表面上获得完整而致密的钛涂层。