当前位置:
X-MOL 学术
›
Russ. Engin. Res.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Quality Control in the Machining of Cylinder Liners at Repair Enterprises
Russian Engineering Research Pub Date : 2020-09-01 , DOI: 10.3103/s1068798x20090105 O. A. Leonov , N. Zh. Shkaruba , Yu. G. Vergazova , P. V. Golinitskiy , U. Yu. Antonova
Russian Engineering Research Pub Date : 2020-09-01 , DOI: 10.3103/s1068798x20090105 O. A. Leonov , N. Zh. Shkaruba , Yu. G. Vergazova , P. V. Golinitskiy , U. Yu. Antonova
The use of the following quality-control instruments in the machining of cylindrical liners at repair shops is considered: Shewhart charts (of moving-range and individual-measurement types) and histograms for analysis of the adjustment precision. A monitoring checklist has been developed for determining the losses due to all defect types. Interchangeability among groups for piston–liner assemblies completely eliminates wasted inventory.
中文翻译:
维修企业缸套加工质量控制
考虑在修理厂加工圆柱衬套时使用以下质量控制仪器:休哈特图(移动范围和单个测量类型)和直方图,用于分析调整精度。已经开发了一个监控清单,用于确定所有缺陷类型造成的损失。活塞-衬套组件组之间的互换性完全消除了库存浪费。
更新日期:2020-09-01
中文翻译:
维修企业缸套加工质量控制
考虑在修理厂加工圆柱衬套时使用以下质量控制仪器:休哈特图(移动范围和单个测量类型)和直方图,用于分析调整精度。已经开发了一个监控清单,用于确定所有缺陷类型造成的损失。活塞-衬套组件组之间的互换性完全消除了库存浪费。