当前位置: X-MOL 学术Arch. Civ. Mech. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Methodology for the in situ testing of the moisture content of brick walls: an example of application
Archives of Civil and Mechanical Engineering ( IF 4.4 ) Pub Date : 2020-10-01 , DOI: 10.1007/s43452-020-00120-3
Anna Hoła

The article presents original methodology of testing the moisture content of brick walls in buildings. It was developed on the basis of own experience acquired during testing the moisture content in many excessively wet buildings erected in various historical periods. The tests were conducted using different methods, including non-destructive methods. To emphasize the importance of the problem, an overview of the methodology was preceded by a brief presentation of the causes and negative effects of excessive moisture and salinity in brick walls. In addition, the article is illustrated with an example of the effects of moisture content tests carried out according to the developed methodology on a facility from the fourteenth century. According to the author, knowledge of the presented methodology, and its application, should contribute to both the improvement of the quality of conducted research and the credibility of the obtained results.



中文翻译:

砖墙水分含量的现场测试方法:一个应用实例

本文介绍了测试建筑物中砖墙水分含量的原始方法。它是根据在测试各个历史时期竖立的许多过度潮湿的建筑物中的水分含量过程中获得的经验而开发的。测试使用不同的方法进行,包括非破坏性方法。为了强调该问题的重要性,在对方法进行概述之前,先简要介绍一下砖墙中过多的水分和盐分的成因和负面影响。此外,本文还举例说明了根据开发的方法对14世纪的设施进行的水分含量测试的效果。根据作者的介绍,对所介绍方法及其应用的了解,

更新日期:2020-10-02
down
wechat
bug