当前位置: X-MOL 学术Int. J. Civ. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Evaluation the Shear Strength Behavior of aged MSW using Large Scale In Situ Direct Shear Test, a case of Tabriz Landfill
International Journal of Civil Engineering ( IF 1.7 ) Pub Date : 2020-02-24 , DOI: 10.1007/s40999-020-00499-3
Mohsen Keramati , Masoud Shahedifar , Mohammad Hosein Aminfar , Hasan Alagipuor

The current study presents the physical and mechanical properties of municipal solid waste (MSW) with different ages of new and old Tabriz landfill. Although there are several theoretical and laboratory methods to investigate the shear strength parameters of MSW, field methods provide more accurate results due to the minimum MSW disturbance and changes, so in this study the shear strength parameters of MSW Tabriz landfill were evaluated using the “Large Scale in Situ Direct Shear Device” with the cross-sectional dimensions 122 × 122 cm. In spite of difficulties related to conducting tests such as potential exposure to various contaminations and the lack of specific equipment in the beginning, it provided more realistic results of the geotechnical behavior of municipal solid waste compared to other methods. Moreover, the in situ unit weight, physical analysis, moisture and organic content at different ages were evaluated to better understand the mechanical response with increase in the age of MSW. The results showed the cohesion and friction angle of 5- and 16-year-old MSW was estimated as 1.17, 2.215 kPa and 31.51°, 21.51°, respectively; According to the results, the shear strength of 5- and 16-year-old MSW is mainly controlled by the friction angle which seems due to the MSW composition as a function of the consumption pattern. The physical analysis of fresh MSW from 2005 to 2017 showed an increase in the fiber content including plastics and textiles. Moreover, studies on MSW mechanical responses over the time revealed a decrease in the shear strength because of the raise in the fiber and plastic content.

中文翻译:

使用大规模原位直接剪切试验评估老化 MSW 的剪切强度行为,以大不里士垃圾填埋场为例

目前的研究展示了新旧大不里士垃圾填埋场不同龄期的城市固体废物 (MSW) 的物理和机械特性。虽然有多种理论和实验室方法来研究 MSW 的剪切强度参数,但由于 MSW 的扰动和变化最小,现场方法提供了更准确的结果,因此在本研究中,MSW Tabriz 垃圾填埋场的剪切强度参数使用“Large Scale in Situ Direct Shear Device”,横截面尺寸为 122 × 122 cm。尽管与进行测试相关的困难,例如可能暴露于各种污染物以及一开始缺乏特定设备,但与其他方法相比,它提供了更真实的城市固体废物岩土特性结果。此外,原位单位重量,评估了不同年龄的物理分析、水分和有机物含量,以更好地了解随着 MSW 年龄增加的机械响应。结果表明,5年和16年生活垃圾的内聚力和摩擦角分别估计为1.17、2.215 kPa和31.51°、21.51°;根据结果​​,5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 成分与消费模式的关系。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。评估了不同年龄的水分和有机物含量,以更好地了解随着 MSW 年龄增加的机械响应。结果表明,5年和16年生活垃圾的内聚力和摩擦角分别估计为1.17、2.215 kPa和31.51°、21.51°;根据结果​​,5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 成分与消费模式的关系。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。评估了不同年龄的水分和有机物含量,以更好地了解随着 MSW 年龄增加的机械响应。结果表明,5 年和 16 年生活垃圾的内聚力和摩擦角分别为 1.17、2.215 kPa 和 31.51°、21.51°;根据结果​​,5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 成分与消费模式的关系。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。结果表明,5年和16年生活垃圾的内聚力和摩擦角分别估计为1.17、2.215 kPa和31.51°、21.51°;根据结果​​,5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 成分与消费模式的关系。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。结果表明,5年和16年生活垃圾的内聚力和摩擦角分别估计为1.17、2.215 kPa和31.51°、21.51°;根据结果​​,5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 组成是消费模式的函数。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 组成是消费模式的函数。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。5 年和 16 年的 MSW 的剪切强度主要受摩擦角控制,这似乎是由于 MSW 组成是消费模式的函数。2005 年至 2017 年新鲜 MSW 的物理分析表明,包括塑料和纺织品在内的纤维含量有所增加。此外,随着时间的推移,对 MSW 机械响应的研究表明,由于纤维和塑料含量的增加,剪切强度会降低。
更新日期:2020-02-24
down
wechat
bug