当前位置: X-MOL 学术J. Phys. Conf. Ser. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Value Engineering in The Implemetation of Kumkang Formwork (Case Study: The Alton Apartment Project in Semarang Indonesia)
Journal of Physics: Conference Series Pub Date : 2020-09-17 , DOI: 10.1088/1742-6596/1625/1/012012
P A P Suwandi , I T Husodo , M W Suryadi

Value engineering is usually done by substitution of materials or change in construction method. One of them is in The Alton Apartment Project in Tembalang, Semarang, which is apply Korean technology on aluminum formwork system called Kumkang. The objectives of this study are to calculate the coefficient of worker productivity, to find out the time required to install the aluminum form (Kumkang) compared to conventional one, and to compare the workers’ costs for conventional formwork and Kumkang aluminum formwork. The analytical method of the study uses the Value Engineering Method. The calculation of the workers unit price coefficient analysis of aluminum formwork work (kumkang) equal to 0.025 MD, while of the unit price of workers on the formwork according to the Indonesian National Standard Work Unit (AHSP-SNI) equals to 0.330 MD. The time required of the aluminum formwork (kumkang) installation are 2,47 days for 1582.10 m2 formwork while the conventional formwork needs 32,6 days for the same volume. The cost calculation shows that the worker cost to install Kumkang Formwork is Rp. 7,200,000 while for the conventional formwork is Rp. 79,200,000. Based on the results, it can be concluded that Kumkang formwork technology is more efficient than conventional system.



中文翻译:

Kumkang 模板实施中的价值工程(案例研究:印度尼西亚三宝垄的奥尔顿公寓项目)

价值工程通常通过材料的替代或施工方法的改变来完成。其中之一是位于三宝垄 Tembalang 的 The Alton Apartment 项目,该项目将韩国技术应用于名为 Kumkang 的铝模板系统。本研究的目的是计算工人生产力系数,找出安装铝模板(Kumkang)与传统模板相比所需的时间,并比较传统模板和 Kumkang 铝模板的工人成本。该研究的分析方法使用价值工程方法。铝模板工作(kumkang)的工人单价系数分析计算等于0.025 MD,而根据印度尼西亚国家标准工作单位(AHSP-SNI)计算模板工人的单价等于0.330 MD。2模板,而传统模板需要 32.6 天才能获得相同的体积。成本计算表明,安装 Kumkang 模板的工人成本为 Rp。7,200,000 而传统模板为 Rp。79,200,000。根据结果​​,可以得出结论,Kumkang 模板技术比传统系统更有效。

更新日期:2020-09-17
down
wechat
bug