当前位置: X-MOL 学术IOP Conf. Ser. Mater. Sci. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Industrial control system software patterns in manufacturing
IOP Conference Series: Materials Science and Engineering Pub Date : 2020-09-16 , DOI: 10.1088/1757-899x/915/1/012056
R A Valiev , Sh Sh Khuzyatov

The technique of pattern-designing software for an industrial control system for standard engineering processes has been implemented, where the same type of equipment is used and the same workpiece processing sequence is implemented. Patterns for the user controller program and supervisory control and monitoring software have been developed. Pattern elements are represented by the same type of sensors and actuators, which have the same algorithms for data processing and calculating of control actions. For them data types, data storage, functionality and organization of the exchange between programmable logic controllers and human-machine interface devices are defined. The necessary correspondence was established between template projects of various levels of the control system, which made it possible to organize a network exchange by data blocks.



中文翻译:

制造业中的工业控制系统软件模式

已经实施了标准工程过程工业控制系统的图案设计软件技术,其中使用相同类型的设备和相同的工件加工顺序。已经开发了用户控制器程序和监督控制和监视软件的模式。模式元素由相同类型的传感器和执行器表示,它们具有相同的数据处理和计算控制动作的算法。为他们定义了可编程逻辑控制器和人机界面设备之间的数据类型、数据存储、功能和交换组织。在控制系统的各级模板项目之间建立了必要的对应关系,这使得通过数据块组织网络交换成为可能。

更新日期:2020-09-16
down
wechat
bug