当前位置: X-MOL 学术IOP Conf. Ser. Mater. Sci. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Recycling components made of polyurethane foam
IOP Conference Series: Materials Science and Engineering Pub Date : 2020-09-16 , DOI: 10.1088/1757-899x/915/1/012051
L N Shafigullin 1 , N V Romanova 1 , A T Gabrakhmanov 1 , O P Korchagin 1 , D A Agashkin 1
Affiliation  

The paper studies the influence of recyclable materials and waste (that are sandwich structures of polyurethane foam products) on physical mechanical properties of polyurethane foam products. It was established that indentation load deflection changed by 11 percent, thermal conductivity coefficient - by 12.5 percent, and the strength of bond between face layer and flexible PU foam remains the same (0.3 N/mm) when compared with PU foam products.



中文翻译:

由聚氨酯泡沫制成的回收组件

本文研究了可回收材料和废料(即聚氨酯泡沫产品的夹层结构)对聚氨酯泡沫产品物理机械性能的影响。与 PU 泡沫产品相比,压痕载荷挠度变化了 11%,导热系数降低了 12.5%,并且面层和软质 PU 泡沫之间的粘合强度保持不变(0.3 N/mm)。

更新日期:2020-09-16
down
wechat
bug