当前位置:
X-MOL 学术
›
Polym. Int.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
The unusual delamination phenomenon of three kinds of lithium‐ion battery separators
Polymer International ( IF 3.2 ) Pub Date : 2020-09-12 , DOI: 10.1002/pi.6122 Lei Ding 1 , Daoxin Zhang 1 , Tong Wu 2 , Feng Yang 1 , Fang Lan 1 , Ya Cao 1 , Ming Xiang 1
Polymer International ( IF 3.2 ) Pub Date : 2020-09-12 , DOI: 10.1002/pi.6122 Lei Ding 1 , Daoxin Zhang 1 , Tong Wu 2 , Feng Yang 1 , Fang Lan 1 , Ya Cao 1 , Ming Xiang 1
Affiliation
An unusual delamination phenomenon on three kinds of lithium‐ion battery separators was investigated in this study, which is closely associated with the compression resistance of the separator. The delamination trends of three kinds of polymer separators were analyzed systematically. Scanning electron microscopy, two‐dimensional wide‐angle X‐ray diffraction, compression and delamination tests show that a separator prepared by the dry process with uniaxial stretching delaminate hardest due to abundant connection or support structure along the thickness direction. However, the multilayer structure stacked along the thickness direction can be seen clearly for separators experiencing biaxial stretching, both for the dry process and wet process. In particular, a separator prepared by the wet process has the poorest connection or support structure along the thickness direction, leading to the strongest delamination trend and the worst compression resistance. Based on this, we control the delamination trend of the separator by adjusting the condensed structure of the precursor film. Besides, the delamination test can quantify the delamination trend of different kinds of separators accurately and further supplement the evaluation criteria of lithium‐ion battery separators, which can help us to better understand and design a separator with optimal microporous structure. © 2020 Society of Industrial Chemistry
中文翻译:
三种锂离子电池隔膜的异常脱层现象
在本研究中,研究了三种锂离子电池隔膜的异常脱层现象,该现象与隔膜的抗压性密切相关。系统分析了三种聚合物隔板的分层趋势。扫描电子显微镜,二维广角X射线衍射,压缩和分层测试表明,由于沿厚度方向的大量连接或支撑结构,通过干法单轴拉伸制备的隔膜最难以分层。然而,对于干式工艺和湿式工艺中经历双轴拉伸的隔膜,可以清楚地看到沿厚度方向堆叠的多层结构。特别是,通过湿法制备的隔板在厚度方向上的连接或支撑结构最差,导致最强的分层趋势和最差的抗压性。基于此,我们通过调整前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会 我们通过调节前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会 我们通过调节前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会
更新日期:2020-09-12
中文翻译:
三种锂离子电池隔膜的异常脱层现象
在本研究中,研究了三种锂离子电池隔膜的异常脱层现象,该现象与隔膜的抗压性密切相关。系统分析了三种聚合物隔板的分层趋势。扫描电子显微镜,二维广角X射线衍射,压缩和分层测试表明,由于沿厚度方向的大量连接或支撑结构,通过干法单轴拉伸制备的隔膜最难以分层。然而,对于干式工艺和湿式工艺中经历双轴拉伸的隔膜,可以清楚地看到沿厚度方向堆叠的多层结构。特别是,通过湿法制备的隔板在厚度方向上的连接或支撑结构最差,导致最强的分层趋势和最差的抗压性。基于此,我们通过调整前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会 我们通过调节前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会 我们通过调节前体膜的冷凝结构来控制隔板的分层趋势。此外,分层测试可以准确地量化各种隔膜的分层趋势,并进一步补充锂离子电池隔膜的评估标准,这可以帮助我们更好地理解和设计具有最佳微孔结构的隔膜。©2020工业化学学会