当前位置:
X-MOL 学术
›
Inorg. Mater. Appl. Res.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Vibration Cladding of Copper Powder with Aluminum
Inorganic Materials: Applied Research Pub Date : 2020-06-17 , DOI: 10.1134/s2075113320030235 Yu. V. Kontsevoi , A. G. Meilakh
中文翻译:
铝粉对铜粉的振动熔覆
更新日期:2020-06-17
Inorganic Materials: Applied Research Pub Date : 2020-06-17 , DOI: 10.1134/s2075113320030235 Yu. V. Kontsevoi , A. G. Meilakh
Abstract
This paper proposes a method for rapid cladding of copper powder with aluminum. The optimal parameters (frequency and amplitude of oscillations) of the experimental setup and the dispersity and volume fraction of the interacting powders are determined. The most productive cladding mechanism is considered. Dependences of the coating thickness (from 5 to 25 μm) on copper particles on the temperature (18–600°C) and the time of heating (5–30 s) the powder mixture are determined. It is shown that the highest rates of the coating growth on copper particles and the formation of Al–Cu intermetallic compounds are achieved at the temperatures of Al and Cu recrystallization.中文翻译:
铝粉对铜粉的振动熔覆