当前位置: X-MOL 学术Org. Electron. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Low temperature preparation of all-inorganic CsPbI3 perovskite solar cells with ethanediamine as additive
Organic Electronics ( IF 3.2 ) Pub Date : 2020-09-10 , DOI: 10.1016/j.orgel.2020.105940
Yu Zhang , Yifan Yang , Xiaohan Zhang , Tianyi Wang , Li Nian , Qikun Rong , Guofu Zhou , Na Li

All-inorganic CsPbI3 perovskite with phase stabilization are fabricated by employing a simple one-pot solution method with ethanediamine as the additive. The ethanediamine induceds the phase stabilization temperature of all-inorganic CsPbI3 perovskite film as low as 80 °C by reducing the grain size, which is the lowest reported phase stabilization temperature for CsPbI3 film so far. More importantly, the prepared films can be stable at room temperature for two months without phase decomposition. The CsPbI3 perovskite solar cells demonstrate power conversion efficiency to 9.62%.



中文翻译:

乙二胺为添加剂的全无机CsPbI 3钙钛矿太阳能电池的低温制备

采用乙二胺为添加剂的简单一锅法制备具有相稳定作用的全无机CsPbI 3钙钛矿。乙二胺通过减小晶粒尺寸使全无机CsPbI 3钙钛矿薄膜的相稳定温度低至80°C,这是迄今为止报道的CsPbI 3薄膜的最低相稳定温度。更重要的是,制得的薄膜在室温下可以稳定两个月而不会发生相分解。CsPbI 3钙钛矿太阳能电池的功率转换效率达到9.62%。

更新日期:2020-09-16
down
wechat
bug