当前位置: X-MOL 学术Int. J. Mod. Phys. B › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Simulation in design air spindle with orifice and distribution grooves
International Journal of Modern Physics B ( IF 1.7 ) Pub Date : 2020-08-18 , DOI: 10.1142/s0217979220401323
Vu Toan Thang 1 , Truong Minh Duc 1, 2 , Nguyen Trong Dat 1 , Nguyen Thanh Trung 1 , Vu Thanh Tung 1
Affiliation  

This paper presents some results of simulation using ANSYS CFX software in design air spindle which has the structure in the form of orifice and grooves to ensure uniform pressure distribution and avoiding air hammer; it is also easy to manufacture and reduces costs. The results of simulation are good in investigating operation of air-spindle which is changed some parameters to find the optimal working mode for the air spindle with speed in the range of 5000–20,000 rpm.

中文翻译:

带孔和分配槽的气动主轴设计仿真

本文介绍了使用ANSYS CFX软件在设计气动主轴时的一些模拟结果,该气动主轴采用孔板和凹槽的形式,以确保压力分布均匀,避免气锤;它也易于制造并降低成本。仿真结果很好地研究了空气主轴的运行情况,改变了一些参数,找到了转速在5000-20000转/分范围内的空气主轴的最佳工作模式。
更新日期:2020-08-18
down
wechat
bug