当前位置: X-MOL 学术Metall. Mater. Trans. A › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Effect of Si Addition on Martensitic Transformation and Microstructure of NiTiSi Shape Memory Alloys
Metallurgical and Materials Transactions A ( IF 2.8 ) Pub Date : 2020-06-22 , DOI: 10.1007/s11661-020-05883-1
Pavel Salvetr , Andrea Školáková , Pavel Novák , Jaroslav Vavřík

The effect of Si addition on microstructure and martensitic transformation of the Ni-Ti-Si SMA was investigated in this work. The Ni49−0.5xTi51−0.5xSix alloys with various amounts of silicon (2.1 ≤ × ≤ 21.1 at. pct) were prepared by the self-propagating high-temperature synthesis (SHS). Temperatures of the phase transformation increase with the increasing amount of silicon in the samples, which also causes the change of the Ti/Ni ratio in the matrix. The temperatures of austenite transformations are around the temperature of 373 K.



中文翻译:

硅添加对NiTiSi形状记忆合金马氏体相变和组织的影响

在这项工作中,研究了Si添加对Ni-Ti-Si SMA的组织和马氏体相变的影响。通过自蔓延高温合成(SHS)制备了具有各种硅含量(2.1≤ × ≤21.1 at。pct)的Ni 49-0.5 x Ti 51-0.5 x Si x合金。相变温度随着样品中硅含量的增加而增加,这也引起基体中Ti / Ni比值的变化。奥氏体转变温度在373 K附近。

更新日期:2020-08-04
down
wechat
bug