The raw material for the production of Al-Mg-Si wires is wire rods, created in the Continuus Properzi line in temper T1 (cooled after forming at an elevated temperature and after natural aging). The general technologies for shaping the mechanical and electrical properties of Al-Mg-Si wire rods include two kinds: high- and low-temperature heat treatments. High-temperature heat treatment includes a homogenization process and a supersaturation process. Low-temperature heat treatment takes place after supersaturation and includes natural or artificial aging. This study shows how the amount of Mg and Si influences the mechanical and electrical properties of EN-AW 6101 wire rods after different kinds of heat treatments. As the general aim of this study was to determine the effect of the material’s temper on its mechanical and electrical properties, the research considered the initial parameters of the starting materials being examined. These parameters can be modified by selecting the chemical composition of the Al-Mg-Si alloy and the value of precipitation hardening obtained with artificial.

中文翻译：

---

Al-Mg-Si盘条热处理对其电导率和强度的影响

生产Al-Mg-Si线材的原材料是线材，它是在Continuus Properzi生产线中以T1温度（在高温成型后自然冷却后冷却）制成的。成形Al-Mg-Si盘条的机械和电性能的一般技术包括两种：高温和低温热处理。高温热处理包括均质化过程和过饱和过程。低温热处理在过饱和后进行，包括自然或人工老化。这项研究表明，Mg和Si的含量如何影响EN-AW 6101盘条在不同类型的热处理后的机械和电气性能。由于这项研究的总体目的是确定材料的回火对其机械和电气性能的影响，该研究考虑了所检查原料的初始参数。这些参数可以通过选择Al-Mg-Si合金的化学成分和通过人工获得的沉淀硬化值来修改。