当前位置: X-MOL 学术J. Text. Inst. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Optimization on the formulation of sizing to enhance the mechanical properties of basalt fiber
The Journal of The Textile Institute ( IF 1.7 ) Pub Date : 2020-06-01 , DOI: 10.1080/00405000.2020.1771078
Dan Xing 1, 2 , Xiong-Yu Xi 1, 3 , Ming-Gang Qi 3 , Qing-Bin Zheng 4 , Peng-Cheng Ma 1, 2
Affiliation  

Abstract

Sizing, a liquid mixture consisting of film former, coupling agent, antistatic and lubricant agents, is normally applied onto the surface of basalt fiber (BF) immediately after the filament was drawn from the melt. In this article, the effect of concentration of constituents in sizing on the mechanical properties of BF was investigated using a Taguchi method with orthogonal array design. The results showed that the Taguchi method is an effective way to formulate the sizing for BF, and there was a good agreement between wettability of sizing and enhancement to mechanical properties of BF. The concentration of main film former in sizing exhibited the strongest effect on governing the tensile strength of BF, followed by the concentrations of auxiliary film former and coupling agent. In addition, the chemical and physical interactions among the components in sizing should be considered when designing a suitable formula of sizing for BF.



中文翻译:

优化上浆配方以增强玄武岩纤维的机械性能

摘要

上浆后,通常将长丝从熔体中拉出后,立即将由成膜剂,偶联剂,抗静电剂和润滑剂组成的液体混合物施涂到玄武岩纤维(BF)的表面上。在本文中,采用带有正交阵列设计的Taguchi方法研究了上浆中成分浓度对高炉机械性能的影响。结果表明,Taguchi法是一种高炉配方的有效方法,在上浆的润湿性与提高高炉机械性能之间有很好的一致性。上浆中主成膜剂的浓度对控制高炉的拉伸强度表现出最强的影响,其次是辅助成膜剂和偶联剂的浓度。此外,

更新日期:2020-06-01
down
wechat
bug