当前位置: X-MOL 学术Fatigue Fract. Eng. Mater. Struct. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
The fatigue crack growth behaviour of 2524‐T3 aluminium alloy in an Al2O3 particle environment
Fatigue & Fracture of Engineering Materials & Structures ( IF 3.7 ) Pub Date : 2020-07-22 , DOI: 10.1111/ffe.13307
Yuqiang Chen 1, 2 , Zhenheng Tang 1 , Suping Pan 3 , Wenhui Liu 1, 2 , Yufeng Song 1 , Yang Liu 1 , Biwu Zhu 1
Affiliation  

The effect of the Al2O3 dust environment on the crack propagation behaviour of 2524‐T3 Al alloy was investigated. The results show that the Al2O3 dust environment reduces the fatigue crack growth rate (FCGR) of alloy especially at low ΔK. Many Al2O3 particles are deposited and stuck in the crack during fatigue loading which promotes crack closure, while this effect is gradually weakened with the increase of ΔK. The deposited Al2O3 particles induce the disorderly arranged slip bands (SBs) ahead of the crack tip which deflects the crack path making it more tortuous in the Al2O3 dust.

中文翻译:

Al2O3颗粒环境下2524-T3铝合金的疲劳裂纹扩展行为

研究了Al 2 O 3的粉尘环境对2524-T3铝合金裂纹扩展行为的影响。结果表明,Al 2 O 3的粉尘环境降低了合金的疲劳裂纹扩展速率(FCGR),特别是在低ΔK时在疲劳加载过程中,许多Al 2 O 3颗粒沉积并粘附在裂纹中,从而促进了裂纹的闭合,而随着ΔK的增加,这种作用逐渐减弱沉积的Al 2 O 3颗粒在裂纹尖端之前引起无序排列的滑带(SBs),这使裂纹路径偏转,使其在Al中更加曲折。2 O 3灰尘。
更新日期:2020-09-02
down
wechat
bug