当前位置:
X-MOL 学术
›
J. Radioanal. Nucl. Chem.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Development of an external (in air) in situ current normalized particle induced gamma-ray emission method utilizing 3.5 MeV proton beam from FOTIA for rapid quantification of low Z elements in glass and ceramic samples
Journal of Radioanalytical and Nuclear Chemistry ( IF 1.6 ) Pub Date : 2020-07-06 , DOI: 10.1007/s10967-020-07266-7 S. K. Samanta , Sk Wasim Raja , V. Sharma , Priya S. Girkar , R. Acharya , P. K. Pujari
Journal of Radioanalytical and Nuclear Chemistry ( IF 1.6 ) Pub Date : 2020-07-06 , DOI: 10.1007/s10967-020-07266-7 S. K. Samanta , Sk Wasim Raja , V. Sharma , Priya S. Girkar , R. Acharya , P. K. Pujari
An external particle induced gamma-ray emission (in air) PIGE facility has been set up for the first time at FOTIA, BARC for rapid and non-destructive quantification of low Z elements. Proton beam of energy of 3.5 MeV was obtained on the target using a 25 μm Tantalum window and Ta collimator of 5 mm diameter. The in situ current normalized PIGE method was validated by quantifying low Z elements in a mixed synthetic standard and in two (certified / standard) reference materials namely USGS CRM G2 and NIST SRM 620. The external PIGE method was applied to lithium-based ceramics, boron carbide and soda-lime and borosilicate glass samples for quantification of low Z elements.
中文翻译:
利用来自 FOTIA 的 3.5 MeV 质子束开发外部(在空气中)原位电流归一化粒子诱导伽马射线发射方法,以快速定量玻璃和陶瓷样品中的低 Z 元素
首次在 BARC FOTIA 建立了外部粒子诱导伽马射线发射(在空气中)PIGE 设施,用于对低 Z 元素进行快速和非破坏性量化。使用 25 μm 钽窗口和 5 mm 直径的 Ta 准直器在目标上获得 3.5 MeV 能量的质子束。原位电流归一化 PIGE 方法通过量化混合合成标准品和两种(认证/标准)参考材料,即 USGS CRM G2 和 NIST SRM 620 中的低 Z 元素进行验证。外部 PIGE 方法应用于锂基陶瓷,用于定量低 Z 元素的碳化硼、钠钙和硼硅酸盐玻璃样品。
更新日期:2020-07-06
中文翻译:
利用来自 FOTIA 的 3.5 MeV 质子束开发外部(在空气中)原位电流归一化粒子诱导伽马射线发射方法,以快速定量玻璃和陶瓷样品中的低 Z 元素
首次在 BARC FOTIA 建立了外部粒子诱导伽马射线发射(在空气中)PIGE 设施,用于对低 Z 元素进行快速和非破坏性量化。使用 25 μm 钽窗口和 5 mm 直径的 Ta 准直器在目标上获得 3.5 MeV 能量的质子束。原位电流归一化 PIGE 方法通过量化混合合成标准品和两种(认证/标准)参考材料,即 USGS CRM G2 和 NIST SRM 620 中的低 Z 元素进行验证。外部 PIGE 方法应用于锂基陶瓷,用于定量低 Z 元素的碳化硼、钠钙和硼硅酸盐玻璃样品。