当前位置: X-MOL 学术J. Eur. Ceram. Soc. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Crack-healing in ytterbium silicate filled with silicon carbide particles
Journal of the European Ceramic Society ( IF 5.7 ) Pub Date : 2020-06-16 , DOI: 10.1016/j.jeurceramsoc.2020.06.032
Willy Kunz , Hagen Klemm , Alexander Michaelis

A study on the influence of the silicate composition on the self-healing ability of a promising environmental barrier coating (EBC) material is reported. The EBC material consists of silicon carbide particles dispersed in a ytterbium silicate matrix. The composition of the silicate was varied from pure monosilicate to pure disilicate including a mixture of 50 vol-% of both phases. Pre-cracked specimens were mechanically tested before and after thermal annealing in air at 1400 °C accompanied by microstructural investigations. It is shown, that the self-healing mechanism is based on the application of compressive surface stresses due to graded oxidation of the SiC particles. With increasing amount of disilicate strength and self-healing ability increase.



中文翻译:

填充碳化硅颗粒的硅酸的裂纹修复

报道了关于硅酸盐组成对有前途的环境屏障涂料(EBC)材料的自愈能力的影响的研究。EBC材料由分散在硅酸y基质中的碳化硅颗粒组成。硅酸盐的组成从纯单硅酸盐变为纯二硅酸盐,包括两相的50体积%的混合物。在1400°C的空气中进行热退火之前和之后,对预开裂的样品进行机械测试,并进行微观结构研究。结果表明,自修复机制是基于SiC颗粒逐渐氧化而产生的压缩表面应力。随着二硅酸盐量的增加,强度和自愈能力增加。

更新日期:2020-06-16
down
wechat
bug