当前位置:
X-MOL 学术
›
Geomat Nat. Hazards Risk
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Automatic generation of landslide profile for complementing landslide inventory
Geomatics, Natural Hazards and Risk ( IF 4.2 ) Pub Date : 2020-01-01 , DOI: 10.1080/19475705.2020.1766578 Langping Li 1 , Hengxing Lan 1, 2 , Alexander Strom 2, 3
Geomatics, Natural Hazards and Risk ( IF 4.2 ) Pub Date : 2020-01-01 , DOI: 10.1080/19475705.2020.1766578 Langping Li 1 , Hengxing Lan 1, 2 , Alexander Strom 2, 3
Affiliation
Abstract Landslide profile has been widely used in the dynamics analysis, characteristics illustration and parameter measurement along the longitudinal direction of landslide. However, landslide profile and landslide characteristic parameters that can be derived from landslide profile have not been formally included in landslide inventories. This paper firstly presented a newly developed algorithm for automatic generation of landslide profile, and then suggested 14 parameters that can be directly derived from landslide profile to characterize landslides. The proposed approach has been coded in a freely available R script called ALPA. A case study showed that the profiles of landslides with various scales and morphologies can be successfully generated by ALPA. A correlation analysis suggested that the 14 parameters can provide independent and informative complements to landslide characterization, which are different from the landslide area and volume. The results also implied that landslide area, which quantifies the total area affected by a landslide, is highly correlated with the product of volume and maximum drop height and the product of volume and maximum residual height, which are related to destructive power. Although limited by some complications, ALPA provides a practical tool for producing landslide profiles and landslide characteristic parameters, which are valuable complements to landslide inventory.
中文翻译:
自动生成滑坡剖面以补充滑坡清单
摘要 滑坡剖面已广泛应用于滑坡纵向的动力学分析、特征说明和参数测量。然而,可以从滑坡剖面推导出的滑坡剖面和滑坡特征参数尚未正式纳入滑坡清单。本文首先提出了一种新开发的自动生成滑坡剖面的算法,然后提出了 14 个参数,这些参数可以直接从滑坡剖面中导出来表征滑坡。所提出的方法已被编码在一个名为 ALPA 的免费可用 R 脚本中。一个案例研究表明,ALPA 可以成功生成各种规模和形态的滑坡剖面。相关性分析表明,这 14 个参数可以为滑坡特征提供独立且信息丰富的补充,这些参数与滑坡面积和体积不同。结果还表明,量化受滑坡影响的总面积的滑坡面积与体积和最大跌落高度的乘积以及体积和最大残余高度的乘积高度相关,后者与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。量化受滑坡影响的总面积,与体积和最大落差的乘积以及体积和最大残余高度的乘积高度相关,这与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。量化受滑坡影响的总面积,与体积和最大落差的乘积以及体积和最大残余高度的乘积高度相关,这与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。
更新日期:2020-01-01
中文翻译:
自动生成滑坡剖面以补充滑坡清单
摘要 滑坡剖面已广泛应用于滑坡纵向的动力学分析、特征说明和参数测量。然而,可以从滑坡剖面推导出的滑坡剖面和滑坡特征参数尚未正式纳入滑坡清单。本文首先提出了一种新开发的自动生成滑坡剖面的算法,然后提出了 14 个参数,这些参数可以直接从滑坡剖面中导出来表征滑坡。所提出的方法已被编码在一个名为 ALPA 的免费可用 R 脚本中。一个案例研究表明,ALPA 可以成功生成各种规模和形态的滑坡剖面。相关性分析表明,这 14 个参数可以为滑坡特征提供独立且信息丰富的补充,这些参数与滑坡面积和体积不同。结果还表明,量化受滑坡影响的总面积的滑坡面积与体积和最大跌落高度的乘积以及体积和最大残余高度的乘积高度相关,后者与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。量化受滑坡影响的总面积,与体积和最大落差的乘积以及体积和最大残余高度的乘积高度相关,这与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。量化受滑坡影响的总面积,与体积和最大落差的乘积以及体积和最大残余高度的乘积高度相关,这与破坏力有关。尽管受到一些复杂因素的限制,ALPA 为生成滑坡剖面和滑坡特征参数提供了实用的工具,这些参数是滑坡清单的宝贵补充。