当前位置: X-MOL 学术J. Superhard Mater. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Properties of Metal–Metal Nitride Vacuum-Arc Multilayer Coatings
Journal of Superhard Materials ( IF 0.9 ) Pub Date : 2020-06-09 , DOI: 10.3103/s1063457620010050
V. F. Gorban’ , A. O. Andreev , V. A. Stolbovoi , A. M. Myslyvchenko , A. D. Kostenko

Abstract

The physicomechanical and tribotechnical characteristics of metal–metal nitride composite multilayer coatings in air are determined by friction with 65G steel, a diamond indenter, and an abrasive belt. Friction is carried out in the speed range from 16 mm/s to 12 m/s with a load of up to 100 N. The smallest wear is recorded for the Mo/MoN composite coating, which is characterized by hardness values of about 25 GPa and a friction coefficient of 0.065. It is shown that small wear values with respect to the abrasive belt are characteristic for metal–metal nitride composite multilayer coatings.


中文翻译:

金属-金属氮化物真空电弧多层涂层的性能

摘要

金属与金属氮化物复合多层涂层在空气中的物理力学和摩擦学特性取决于与65G钢,金刚石压头和砂带的摩擦力。摩擦的速度范围为16 mm / s至12 m / s,最大载荷为100N。Mo/MoN复合涂层的磨损最小,其硬度值约为25 GPa摩擦系数为0.065。结果表明,金属-金属氮化物复合多层涂层的特征是,相对于砂带的磨损值较小。
更新日期:2020-06-09
down
wechat
bug