当前位置: X-MOL 学术Mater. Sci. Technol. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range
Materials Science and Technology ( IF 1.8 ) Pub Date : 2020-04-20 , DOI: 10.1080/02670836.2020.1753154
Sonun Ulan kyzy 1 , Rainer Völkl 1 , Oliver Munz 2 , Tim Fischer 3 , Sarah Welzenbach 3 , Uwe Glatzel 1
Affiliation  

ABSTRACT The nickel-based superalloys Hastelloy X and Haynes 214 are widely used for honeycomb liners; however, thermo-physical properties at temperatures close to the melting range are poorly described in the literature. Based on the thermo-physical properties, endothermic effects between 550°C and 650°C have been observed that develop due to the formation of the short-range order in both alloys and in Haynes 214, in addition to the short-range order, an increase in the specific heat capacity due to the γ′-precipitation up to 950° was detected. At low and intermediate temperatures, the Hastelloy X is significantly better suited than the Haynes 214. At high temperatures the Haynes 214 is superior to the Hastelloy X due to the dissolution of the γ′-phase.

中文翻译:

Hastelloy X 和 Haynes 214 接近熔点范围的热物理性能

摘要 镍基高温合金 Hastelloy X 和 Haynes 214 广泛用于蜂窝衬里;然而,在接近熔程的温度下的热物理性质在文献中的描述很少。根据热物理性质,除了短程有序之外,由于在两种合金和海恩斯 214 中形成了短程有序,已经观察到 550°C 和 650°C 之间的吸热效应,由于 γ'-沉淀高达 950°,检测到比热容增加。在低温和中温下,Hastelloy X 明显优于 Haynes 214。在高温下,由于 γ' 相的溶解,Haynes 214 优于 Hastelloy X。
更新日期:2020-04-20
down
wechat
bug