当前位置: X-MOL 学术Int. J. Adv. Manuf. Technol. › 论文详情
Microstructure and mechanical properties of 316L austenitic stainless steel processed by different SLM devices
The International Journal of Advanced Manufacturing Technology ( IF 2.496 ) Pub Date : 2020-05-22 , DOI: 10.1007/s00170-020-05371-1
A. Röttger, J. Boes, W. Theisen, M. Thiele, C. Esen, A. Edelmann, R. Hellmann

In this work, we examined the influence of different types of selective laser melting (SLM) devices on the microstructure and the associated material properties of austenitic 316L stainless steel. Specimens were built using powder from the same powder batch on four different SLM machines. For the specimen build-up, optimized parameter sets were used, as provided by the manufacturers for each individual SLM machine. The resulting microstructure was investigated by means of scanning electron microscopy, which revealed that the different samples possess similar microstructures. Differences between the microstructures were found in terms of porosity, which significantly influences the material properties. Additionally, the build-up direction of the specimens was found to have a strong influence on the mechanical properties. Thus, the defect density defines the material’s properties so that the ascertained characteristic values were used to determine a Weibull modulus for the corresponding values in dependence on the build-up direction. Based on these findings, characteristic averages of the mechanical properties were determined for the SLM-manufactured samples, which can subsequently be used as reference parameters for designing industrially manufactured components.
更新日期:2020-05-22

 

全部期刊列表>>
Springer化学材料学
骄傲月
如何通过Nature平台传播科研成果
跟Nature、Science文章学绘图
隐藏1h前已浏览文章
中洪博元
课题组网站
新版X-MOL期刊搜索和高级搜索功能介绍
ACS材料视界
x-mol收录
南开大学
朱守非
廖良生
郭东升
汪铭
伊利诺伊大学香槟分校
徐明华
中山大学化学工程与技术学院
试剂库存
天合科研
down
wechat
bug