A cyclic loading test is a simple method to determine the behavior of shear connection between steel and concrete. Tests using different cases of cyclic loading is necessary since most experimental programs considered limited loading conditions during reversed cyclic loading test. Various cyclic loading cases should be applied during cyclic tests in order to consider different situations. This study applied various cyclic loading cases to analyze and verify the effect of cyclic behavior on shear connection using stubby Y-type perfobond rib shear connectors. Our result show that the shear strength under cyclic loads was lower than that under monotonic load. Furthermore, plastic slip occurred after cyclic loads in each test.

循环载荷试验是确定钢与混凝土之间剪切连接行为的简单方法。由于大多数实验程序在反向循环加载测试中都考虑到有限的加载条件，因此有必要使用不同循环加载情况进行测试。为了考虑不同的情况，在循环测试期间应采用各种循环荷载工况。这项研究应用了各种循环荷载工况，以分析和验证循环行为对使用短粗Y型perfobond肋骨剪力连接器的剪力连接的影响。我们的结果表明，循环载荷下的剪切强度低于单调载荷下的剪切强度。此外，在每个测试中，循环载荷后都会发生塑性滑移。