当前位置:
X-MOL 学术
›
Pet. Sci. Technol.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Fuel gas production from asphaltene and recycled polyethylene
Petroleum Science and Technology ( IF 1.5 ) Pub Date : 2020-01-20 , DOI: 10.1080/10916466.2019.1587456 Jia-Ming Zhu 1 , Jia-Bao Liu 2 , Muhammad Kamran Siddiqui 3 , Waqas Nazeer 4 , Yun Liu 5
Petroleum Science and Technology ( IF 1.5 ) Pub Date : 2020-01-20 , DOI: 10.1080/10916466.2019.1587456 Jia-Ming Zhu 1 , Jia-Bao Liu 2 , Muhammad Kamran Siddiqui 3 , Waqas Nazeer 4 , Yun Liu 5
Affiliation
Abstract Like other heavy oils, asphaltene is comprised of carbon, hydrogen, oxygen, nitrogen, sulfur and a small amount of vanadium and nickel. Polyethylene is the most common plastic that consists of high molecular weight hydrocarbons. Since this compound is a very good electrical insulator, it is widely used in the electricity industry. Gasification of asphaltene and polyethylene has not been extensively studied up until now. Few studies have more on the gas composition obtained from a specific fuel. This study tries to compare gas composition obtained from gasification of different kinds of asphaltene and polyethylene. Effect of reaction temperature on H2/CO and lower heating value of fuel gas was studied. Since the LHV of the produced syngas from fossil fuels is more than biomass and plastic wastes, it has more applications.
中文翻译:
从沥青质和回收聚乙烯生产燃气
摘要 与其他重油一样,沥青质由碳、氢、氧、氮、硫和少量的钒、镍组成。聚乙烯是最常见的由高分子量碳氢化合物组成的塑料。由于这种化合物是一种非常好的电绝缘体,因此在电力工业中得到了广泛的应用。迄今为止,沥青质和聚乙烯的气化还没有得到广泛的研究。很少有研究对从特定燃料中获得的气体成分有更多的研究。本研究试图比较不同种类沥青质和聚乙烯气化得到的气体成分。研究了反应温度对H2/CO和燃气低热值的影响。由于化石燃料生产的合成气的 LHV 比生物质和塑料废物更多,因此它有更多的应用。
更新日期:2020-01-20
中文翻译:
从沥青质和回收聚乙烯生产燃气
摘要 与其他重油一样,沥青质由碳、氢、氧、氮、硫和少量的钒、镍组成。聚乙烯是最常见的由高分子量碳氢化合物组成的塑料。由于这种化合物是一种非常好的电绝缘体,因此在电力工业中得到了广泛的应用。迄今为止,沥青质和聚乙烯的气化还没有得到广泛的研究。很少有研究对从特定燃料中获得的气体成分有更多的研究。本研究试图比较不同种类沥青质和聚乙烯气化得到的气体成分。研究了反应温度对H2/CO和燃气低热值的影响。由于化石燃料生产的合成气的 LHV 比生物质和塑料废物更多,因此它有更多的应用。