当前位置: X-MOL 学术Optim. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Type-E disassembly line balancing problem with multi-manned workstations
Optimization and Engineering ( IF 2.1 ) Pub Date : 2019-09-20 , DOI: 10.1007/s11081-019-09465-y
Ibrahim Kucukkoc , Zixiang Li , Yuchen Li

Recovering the end-of-life (EOL) products helps companies reduce the purchasing cost for goods and materials that can be removed from EOL products and reused. This also contributes to the efforts aiming at reducing the environmental consequences of hazardous materials. Disassembly lines play a vital role in the disassembling process of EOL products. This research introduces the Type-E multi-manned disassembly line balancing problem and proposes efficient linear and non-linear models to solve the problem. The main contribution of this work is the simultaneous optimization of the two conflicting objectives, i.e. cycle time and the number of workstations to maximize the efficiency of disassembly lines. Another contribution of the work is that the workstations may operate in a multi-manned environment (with more than one worker in a workstation) in certain conditions to maximize the line efficiency. The problem is defined and modelled mathematically. Numerical examples are exhibited to illustrate the solutions for problems. A comprehensive computational study is conducted to solve the test problems using the proposed models and the results are compared to the literature. It is observed that handling the Type-E objective provides a clear advantage to maximize the line efficiency. Furthermore, allowing the multiplication of the capacity of the workstations help improve the line efficiency enormously. This is thanks to the increased opportunity in the process of assigning tasks to workstations.

中文翻译:

多人工作站的E型拆装线平衡问题

恢复报废(EOL)产品可帮助公司降低可从EOL产品中取出并重复使用的商品和材料的购买成本。这也有助于减少有害材料对环境的影响。拆装线在EOL产品的拆装过程中起着至关重要的作用。这项研究介绍了Type-E多人拆卸线平衡问题,并提出了有效的线性和非线性模型来解决该问题。这项工作的主要贡献是同时优化了两个相互矛盾的目标,即周期时间和工作站数量,以最大程度地提高拆卸线的效率。这项工作的另一个贡献是,工作站可以在某些条件下在多人环境(工作站中有多个工人)下运行,以最大化生产效率。该问题是数学定义和建模的。数值例子说明了解决问题的方法。使用提出的模型进行了全面的计算研究以解决测试问题,并将结果与​​文献进行了比较。可以看出,处理E型物镜具有明显的优势,可以最大程度地提高生产线效率。此外,允许增加工作站的容量有助于极大地提高生产线效率。这是由于将任务分配给工作站的机会增加了。该问题是数学定义和建模的。数值例子说明了解决问题的方法。使用提出的模型进行了全面的计算研究以解决测试问题,并将结果与​​文献进行了比较。可以看出,处理E型物镜提供了明显的优势,可以最大程度地提高生产线效率。此外,允许增加工作站的容量有助于极大地提高生产线效率。这是由于将任务分配给工作站的机会增加了。该问题是数学定义和建模的。数值例子说明了解决问题的方法。使用提出的模型进行了全面的计算研究以解决测试问题,并将结果与​​文献进行了比较。可以看出,处理E型物镜具有明显的优势,可以最大程度地提高生产线效率。此外,允许增加工作站的容量有助于极大地提高生产线效率。这是由于将任务分配给工作站的机会增加了。使用提出的模型进行了全面的计算研究以解决测试问题,并将结果与​​文献进行了比较。可以看出,处理E型物镜提供了明显的优势,可以最大程度地提高生产线效率。此外,允许增加工作站的容量有助于极大地提高生产线效率。这是由于将任务分配给工作站的机会增加了。使用提出的模型进行了全面的计算研究以解决测试问题,并将结果与​​文献进行了比较。可以看出,处理E型物镜具有明显的优势,可以最大程度地提高生产线效率。此外,允许增加工作站的容量有助于极大地提高生产线效率。这是由于将任务分配给工作站的机会增加了。
更新日期:2019-09-20
down
wechat
bug