当前位置: X-MOL 学术High Energy Density Phys. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Development of a 100-J DPSSL as a laser processing platform in the TACMI consortium
High Energy Density Physics ( IF 1.6 ) Pub Date : 2020-05-03 , DOI: 10.1016/j.hedp.2020.100800
Takashi Sekine , Takashi Kurita , Masateru Kurata , Takaaki Morita , Yuma Hatano , Yuki Muramatsu , Takeshi Watari , Yuki Kabeya , Takuto Iguchi , Ryo Yoshimura , Yoshinori Tamaoki , Yasuki Takeuchi , Yoshio Mizuta , Kazuki Kawai , Yujin Zheng , Yoshinori Kato , Takashi Suzuki , Norio Kurita , Toshiyuki Kawashima , Shigeki Tokita , Junji Kawanaka , Norimasa Ozaki , Yoichiro Hironaka , Keisuke Shigemori , Ryosuke Kodama , Ryunosuke Kuroda , Eisuke Miura

We demonstrated 117-J laser output in a nanosecond regime with a diode-pumped Yb:YAG ceramic laser amplifier. The repetition rate was 0.05 Hz, and the pulse duration was around 40 ns. 5-J input energy was amplified by two cryogenically cooled Yb:YAG ceramic laser heads. Six Yb:YAG ceramic disks in each laser head were cooled by cryogenic helium gas with a temperature of 175 K. The output energy of the first and second laser heads was about 28 and 117 J.



中文翻译:

在TACMI联盟中开发100-J DPSSL作为激光处理平台

我们用二极管泵浦的Yb:YAG陶瓷激光放大器演示了纳秒级117-J激光输出。重复率为0.05 Hz,脉冲持续时间约为40 ns。通过两个低温冷却的Yb:YAG陶瓷激光头放大了5J输入能量。每个激光头中的六个Yb:YAG陶瓷盘用温度为175 K的低温氦气冷却。第一和第二激光头的输出能量分别约为28和117J。

更新日期:2020-05-03
down
wechat
bug