In this paper, a double-layer half-cycle generator (HCG) has been designed and built. The proposed HCG creates sinusoidal flow with 400 A peak and 5 µs pulse width which feeds RLC load with 100 kHz work frequency, within resonance mode. Previous HCGs have been designed based on saturable reactor (SR). It should be noted that SR is a nonlinear element, and it will be distanced from its desirable performance upon change of temperature and under impact; however, a double-layer HCG has been proposed with no such defects. In proposed HCG, thyristor has been used instead of SR which is controllable, and it has none of aforementioned problems. Also, when SR is eliminated, its reverse retrieval needs no minority carriers. This way, sweep-out circuit may be also eliminated. From among other advantages of proposed HCG, reduction in number of circuit layers may be referred to, comparing to previous HCG. This results in reduction in number of equipment which in turn optimizes proposed HCG, in terms of volume and manufacturing costs. Finally, proposed HCG has been simulated in Matlab, while it has been implemented practically. Comparing simulation results and laboratory sample confirms correctness of relationships, in analytical design of HCG.

中文翻译：

---

频率范围为 400 A 和 100 kHz 的半周期发生器的优化设计与实现

在本文中，已经设计并建造了一个双层半周发电机（HCG）。建议的 HCG 产生峰值为 400 A 和脉冲宽度为 5 µs 的正弦流，在谐振模式下以 100 kHz 的工作频率为 RLC 负载供电。以前的 HCG 是基于饱和反应堆 (SR) 设计的。需要注意的是，SR是非线性元件，在温度变化和冲击下会偏离其理想性能；然而，已经提出了没有此类缺陷的双层 HCG。在提出的 HCG 中，已经使用晶闸管代替可控的 SR，并且它没有上述问题。此外，当消除 SR 时，其反向检索不需要少数载流子。这样，也可以消除清除电路。从提议的 HCG 的其他优点中，与之前的 HCG 相比，可以参考电路层数量的减少。这导致设备数量的减少，从而在数量和制造成本方面优化了提议的 HCG。最后，提出的 HCG 已经在 Matlab 中进行了模拟，并已得到实际实现。在 HCG 的分析设计中，比较模拟结果和实验室样品确认关系的正确性。