Abstract

The aim of the work is to show the potentialities of the method of measuring ohmic resistance for investigating the anodic dissolution of metals. It is shown that simultaneous measurement of metal dissolution rate by using this method (by a change in the specimen weight, which is calculated by a change of its resistance) and by the charge consumed for the metal polarization enables us to determine the electrochemical equivalent of stainless steel. The dependence of cathodic component of the current on the anodic potential is obtained and the potential range adjacent to the open-circuit potential, where both anodic and cathodic reactions should be taken into account, is determined.

中文翻译：

---

用欧姆电阻测量方法研究不锈钢在HCl中的阳极溶解

摘要

这项工作的目的是显示用于研究金属阳极溶解的测量欧姆电阻的方法的潜力。结果表明，使用这种方法（通过改变样品重量，通过改变其电阻来计算）和通过金属极化所消耗的电荷，可以同时测量金属的溶解速率，这使我们能够确定金属的电化学当量。不锈钢。获得电流的阴极分量对阳极电势的依赖性，并确定与开路电势相邻的电势范围，在该范围内应同时考虑阳极和阴极反应。