Self-propagating high temperature synthesis (SHS) was used to obtain porous cermet membranes based on a mixture of aluminum oxide, silicon carbide, and magnesium oxide powders. The obtained membranes are catalytically active. The surfaces of the open pores in them were modified by rhenium-tungsten active components using the alkoxy method. The highest selectivity in terms of propane (about 60%) is achieved at temperature 600°C. In addition, the optimal conditions for implementing the propane dehydrogenation process is temperature 650°C at which the quite high selectivity for the most important monomers remains with a relatively small contribution of accessory processes.

中文翻译：

---

使用多孔陶瓷催化转化器对丙烯进行丙烯脱氢

自蔓延高温合成（SHS）用于获得基于氧化铝，碳化硅和氧化镁粉末混合物的金属陶瓷多孔膜。所获得的膜具有催化活性。使用烷氧基方法通过by钨活性成分对其中的开孔表面进行了改性。在600°C的温度下，丙烷的选择性最高（约60％）。另外，用于实施丙烷脱氢过程的最佳条件是650℃的温度，在该温度下，对于最重要的单体仍具有相当高的选择性，而辅助工艺的贡献相对较小。