当前位置: X-MOL 学术Microchem. J. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Amperometric H2 Sensor with PtxPdy alloy electrode prepared by pulsed electrodeposition method
Microchemical Journal ( IF 4.8 ) Pub Date : 2020-07-01 , DOI: 10.1016/j.microc.2020.104851
E. Jayanthi , N. Murugesan , C. Ramesh

Abstract Method of deposition of electrocatalysts plays a vital role in controlling the particle size and in turn decides the catalytic activity of electrocatalysts in various applications. The present study is on preparing the PtxPdy alloys on gas diffusion layer (GDL) by pulsed electrodeposition method. The prepared electrodes are used as sensing electrodes in amperometric H2 sensor. This sensor operates in two electrode mode similar to proton exchange membrane fuel cell and uses Nafion as proton conducting electrolyte. Sensing electrodes with three different compositions of PtxPdy alloys were developed. Field emission scanning electron microscopy studies of PtxPdy alloys showed uniform distribution with spherical morphology. Energy dispersive X-ray mapping of alloy confirmed the uniform distribution of Pt and Pd in PtxPdy. The formation of alloy was proved by grazing incidence X-ray diffraction and high resolution transmission electron microscopy. Compositions of three different PtxPdy alloys were investigated by energy dispersive X-ray analysis and inductively coupled plasma mass spectrometry. Electrochemical active surface area of PtxPdy alloys was measured by carrying out cyclic voltammetry. Sensors with PtxPdy alloy based diffusion electrodes were assembled and tested. All PtxPdy alloys based sensors showed a linear variation with percentage concentrations of H2 (1–5%). Sensor having diffusion electrode with PtxPdy alloy of composition Pt54Pd46 in two electrode mode gave better response behaviour for H2 in Ar compared to pristine Pt.

中文翻译:

采用脉冲电沉积法制备的 PtxPdy 合金电极的电流式 H2 传感器

摘要 电催化剂的沉积方法在控制粒径方面起着至关重要的作用,进而决定了电催化剂在各种应用中的催化活性。本研究是通过脉冲电沉积方法在气体扩散层 (GDL) 上制备 PtxPdy 合金。制备的电极用作电流式 H2 传感器中的传感电极。该传感器以类似于质子交换膜燃料电池的双电极模式运行,并使用 Nafion 作为质子传导电解质。开发了具有三种不同成分的 PtxPdy 合金的传感电极。PtxPdy 合金的场发射扫描电子显微镜研究显示具有球形形态的均匀分布。合金的能量色散 X 射线图证实了 Pt 和 Pd 在 PtxPdy 中的均匀分布。通过掠入射X射线衍射和高分辨率透射电子显微镜证明合金的形成。通过能量色散 X 射线分析和电感耦合等离子体质谱法研究了三种不同 PtxPdy 合金的成分。PtxPdy合金的电化学活性表面积通过循环伏安法测定。组装并测试了具有 PtxPdy 合金基扩散电极的传感器。所有基于 PtxPdy 合金的传感器都显示出随 H2 百分比浓度 (1-5%) 的线性变化。与原始 Pt 相比,在两个电极模式下具有由 PtxPdy 合金组成的 PtxPdy 合金扩散电极的传感器在 Ar 中提供了更好的响应行为。通过能量色散 X 射线分析和电感耦合等离子体质谱法研究了三种不同 PtxPdy 合金的成分。PtxPdy合金的电化学活性表面积通过循环伏安法测定。组装并测试了具有 PtxPdy 合金基扩散电极的传感器。所有基于 PtxPdy 合金的传感器都显示出随 H2 百分比浓度 (1-5%) 的线性变化。与原始 Pt 相比,在两个电极模式下具有由 PtxPdy 合金组成的 PtxPdy 合金扩散电极的传感器在 Ar 中提供了更好的响应行为。通过能量色散 X 射线分析和电感耦合等离子体质谱法研究了三种不同 PtxPdy 合金的成分。PtxPdy合金的电化学活性表面积通过循环伏安法测定。组装并测试了具有 PtxPdy 合金基扩散电极的传感器。所有基于 PtxPdy 合金的传感器都显示出随 H2 百分比浓度 (1-5%) 的线性变化。与原始 Pt 相比,在两个电极模式下具有由 PtxPdy 合金组成的 PtxPdy 合金扩散电极的传感器在 Ar 中提供更好的响应行为。组装并测试了具有 PtxPdy 合金基扩散电极的传感器。所有基于 PtxPdy 合金的传感器都显示出随 H2 百分比浓度 (1-5%) 的线性变化。与原始 Pt 相比,在两个电极模式下具有由 PtxPdy 合金组成的 PtxPdy 合金扩散电极的传感器在 Ar 中提供了更好的响应行为。组装并测试了具有 PtxPdy 合金基扩散电极的传感器。所有基于 PtxPdy 合金的传感器都显示出随 H2 百分比浓度 (1-5%) 的线性变化。与原始 Pt 相比,在两个电极模式下具有由 PtxPdy 合金组成的 PtxPdy 合金扩散电极的传感器在 Ar 中提供更好的响应行为。
更新日期:2020-07-01
down
wechat
bug